Sanyo VCC-XZN600P, Инструкция по эксплуатации

Страница: 67 / 153

moves to the next digit.
Perform the same procedure repeatedly until you enter the last character of the camera title.
After completing the camera title setting, use the / button to select [POSITION], and press
the SET button.
The camera title you set appears in the top left corner of the screen.
Use the buttons to determine the position for the camera title to be displayed, and
press the SET button.
The camera title setting screen appears again.
Select [MENU] and choose “BACK” or “END” to complete the setting.
Use the / button to select [ZOOM RATIO], use the / button to choose “ON”, and press
the SET button.
The current zoom magnification power appears in the right bottom corner of the screen.
The camera title can use up to 16 characters. “?” indication for the unused digits will not be displayed
in the monitor.
“(2)” in the character selection panel represents the carriage return character. When the character is
entered, the carriage return is inserted (the cursor moves to the first digit of the next line).
If you want to change a character in the title, use the / button to move the cursor into the “title
entry field: ”, and then use the / button to move the cursor to the desired position, and enter
the new character.
3
4
5
1
67 / 153