Sanyo VCC-XZN600P, Инструкция по эксплуатации

Страница: 132 / 153

Enables/disables transmission of the alarm notification e-mail.
ALARM (FTP)
Enables/disables alarm image transmission in the FTP mode.
REMOTE ALARM “ACTIVE”
Enables/disables Alarm Output remotely.
For each function above, select “ON” or “OFF”.
Copies the setting of the selected row. Clicking the [COPY] button stores the setting in the memory buffer and
turns the button color to red.
Replaces the row where the [PASTE] button is clicked with the setting copied using the [COPY] button.
The schedule configured in [START/END] ( ) is displayed as a map.
Click the [SET] button at the bottom of the screen to update the contents.
Displays the [IMAGE TRANFER SETTINGS] screen.
Displays the [HELP] screen in a separate window.
The auto-mode function operates the camera at the scheduled time automatically according to the specified
operation pattern.
You can specify up to two auto-mode operation patterns per day.
OFF Disables the function.
ON Performs the function according to the schedule.
2
The alarm image transmission and timer transmission in the FTP mode can be performed according
to the schedule specified on this screen.
If the schedules overlap, the operation that requires longer time takes precedence.
In the case shown in the figure below, the function works continuously from the earlier start time
(START1) to the later end time (END2).
If the scheduled duration is changed after the function is activated, the function will follow the
updated schedule.
132 / 153