Sanyo VCC-XZN600P, Инструкция по эксплуатации

Страница: 22 / 153

Select [MENU] and choose “BACK” or “END” to complete the setting.
Use push-lock auto white balance (AWC) if auto trace white balance (ATW) does not reproduce a natural white
balance.
Direct the camera lens toward a white wall or anything that is white and adjust the white balance by one-push
operation.
Use the / button to select [WHITE BALANCE], use the / button to choose “AWC”, and
press the SET button.
The AWC SETTING screen appears.
Use the / button to select [AWC LOCK] and, with “SET ↓ ” displayed, press the SET button.
The setting changes from “ ” to “ (highlighted)” in two seconds, which indicates that the white
balance adjustment has been completed.
Select [MENU] and choose “BACK” or “END” to complete adjustment.
You can set the color temperature to a fixed value.
Use the / button to select [WHITE BALANCE] and use the / button to choose the desired
fixed white balance option.
Available settings:
2
1
2
If the white balance adjustment does not reproduce the desired result, press the SET button again
with “SET
↓
” displayed.
To fine-tune the white balance after the adjustment, select [GO TO MWB] using the / button and
press the SET button.
Then, when the MWB SETTING screen appears, manually adjust the gain values of the red (R) and
blue (B) signals.
3
1
22 / 153