Sanyo VCC-XZ400P, Инструкция по эксплуатации

Страница: 30 / 47

VIEW SETTING
IRIS setting
2
Use the CURSOR button (
jldc
) to
move the cursor to move the mask
pattern over the area not to be sensed,
then press the SET button.
☞
The mask pattern will be set. You can use
the same steps to set additional mask
patterns.
Note: The initial mask pattern is at the upper
left of the screen, and it is not set. To
clear a mask pattern after it is set, press
the SET button again.
3
Use the CURSOR button (
l
) to move a
mask pattern to the bottom area of the
screen and continue holding it for 3
seconds.
To return the settings in this screen to their
defaults, change PRESET to ON and then
press the SET button.
To close the menu screen or return to the
previous screen, select BACK or END for
MENU and press the SET button.
SENSE UP setting
Use the CURSOR button (
j
or
l
) to move
the cursor to SENSE UP, then use the
CURSOR button (
d
or
c
) to select the
power of the electronic sensitivity.
Available settings: OFF, x2, x4, x8, x16, x32
Note:
•
Electronic sensitivity boosting (SENSE UP)
automatically lengthens the CCD exposure
time in dark situations. Accordingly, do not
use for light target objects. Because
exposure time is lengthened while in
operation, moving target objects may cause
conspicuous after images and blurs.
•
It is not possible to set SENSE UP
(activated) or SHUTTER (LONG) when
MOTION is set to “ON”.
•
When SENSE UP is activated for IRIS
SETTING, the electronic shutter cannot be
forcibly moved.
•
If DAY/NIGHT is set to “AUTO” and the
images are in color mode, electronic
sensitivity boosting will not operate.
To return the settings in this screen to their
defaults, change PRESET to ON and then
press the SET button.
To close the menu screen or return to the
previous screen, select BACK or END for
MENU and press the SET button.
LEVEL setting
Use the CURSOR button (
j
or
l
) to move
the cursor to LEVEL, then use the CURSOR
button (
d
or
c
) to adjust the iris level.
Available settings: 0 – 100
•
The larger the number, the more it brightens.
To return the settings in this screen to their
defaults, change PRESET to ON and then
press the SET button.
To close the menu screen or return to the
previous screen, select BACK or END for
MENU and press the SET button.
IRIS SETTING
BLC MULT
SENSE UP
x 4
(LEVEL)
40
IRIS SETTING
BLC MULT
SENSE UP
x 4
(LEVEL)
40
Eng
lis
h
29