Sanyo VCC-P6784, Инструкция по эксплуатации

Страница: 16 / 104

GB
15
Naming Cameras <OPTION> - <TITLE>
4
Repeat step
3
to complete the name and select
[ID].
Example: ROOM1
• The letters “???....” do not appear on the monitoring screen, but
if you select “ON” for [TITLE] and then enter no letter at all, the
monitor will show you “???....”.
5
Select [POSITION] – “SET” and press the SET
button.
R
On the normal monitoring screen, the name will be displayed.
6
Determine the display position of the name using
the Selection buttons and then press the SET
button.
R
Returns to the settings screen.
■
To delete the name specified:
Set [PRESET] to “ON”, and press the SET button.
R
All the characters will be replaced with “?”.
MEMO: If you want the name to be displayed on the monitor in two lines,
insert the line feed mark (
v
) in the “ID string” wherever you want to
start a new line. On the monitor screen, the name will be displayed
in two lines. You can enter up to 16 characters including the line
feed mark (
v
).
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
0123456789 :-v
·
ID ROOM1???????????
x
TITLE SETTING
ID string
ID ROOM1???????????
x
POSITION
PRESET
MENU
SET
OFF
BACK
· y
Note: • If an alarm signal is input, the camera name on the screen will
blink during the time that has been set in [DURATION] (see page
26). When the camera name is not specified, “???....” will blink.
• When masking setting is “ON”, the camera name will not be
displayed.
ROOM1
L5BY2_US(VCC-P6784)(GB_FR_ES).book 15 ページ ２００７年１２月７日 金曜日 午後３時３９分