Sanyo VCC-P6784, Инструкция по эксплуатации

Страница: 19 / 104

18
GB
Setting Camera Performance
Open the screen for setting and adjusting the camera performance.
Adjusting Synchronization (0 – 524).
• Make adjustments so that the vertical synchronization of the monitor
screen does not move up or down.
Correct it by adjusting conditions or
changing correction method.
■
CENT (Center zone metering)
Correction is made based on the optical measurement
that is focused on the central area of the screen (the image of subject to be
corrected is located in the center of the screen).
■
MULT1 (Multi-spot metering, Normal mode)
Correction is made based on the optical measurement and assessment of the
entire screen (the image of subject to be corrected is not limited to a center of the
screen location).
■
MULT2 (Multi-spot metering, High mode)
Compared to MULT1, faster backlight correction is possible against a lesser
amount of light.
■
OFF
No correction is performed for backlight.
Adjust the brightness (iris) (0 – 100).
A L-L Setting (Line Lock) <SYNC>
SYNC ·
BLC
IRIS
WHITE BALANCE
AGC GAIN
GAMMA
SHUTTER
APERTURE
OPTION
PRESET
MENU
L-L
OFF
SET
y
y
ATW
NORM
0.45
60
HIGH
SET
y
OFF
END
- H E
D
A
B
D
F
H
C
E
G
☞
See page 19.
☞
See page 20.
· 250
L-L SETTING
<V SYNC PHASE>
B Backlight Compensation <BLC>
C Adjusting Iris Level <IRIS>
Note: • Under extremely bright lighting, unfavorable phenomena may occur such
as swaths of smear on the screen, because light intensity entering the
lens is too high to be controlled. Reduce the intensity by changing the
angle of the lighting source or by other means.
• If the images of subjects under fluorescent lighting are flickering, replace
fluorescent lighting with incandescent lighting.
IRIS SETTING
<LEVEL>
· 20
• The greater the number, the brighter it
gets.
Ca
m
e
ra
S
e
tt
in
g
s
L5BY2_US(VCC-P6784)(GB_FR_ES).book 18 ページ ２００７年１２月７日 金曜日 午後３時３９分