6
1
While pressing down the cabinet section
(F) on the opposite side of the rib mark
(E), open the dome cover in the arrowed
direction.
2
Tighten the camera unit securely using
the supplied screw (G).
3
Plug the LAN cable into the LAN port on
the network board.
b
Set up the camera remotely (see page 11).
b
Check the settings screen or camera
angle on a portable monitor (see page 11).
Align the rib marks (A) and push the dome
cover until it clicks.
Plug the PoE hub into a power outlet.
5. Remove the dome cover
6. Adjust/Check the video image from
the camera
E
F
Push
G
LAN port
7. Install the dome cover
8. Power on
A
L5BQ2_XE(INSTALLATION).book 6 ページ ２００６年８月２８日 月曜日 午後４時１分
