Care and Cleaning (continued)
Air Cleaning Filter
(not provided)
The air cleaning filter removes dust and dirt from the air, and reduces
odors and smoke from tobacco.
NOTE
The air cleaning filter is not provided with the air conditioner and must
be purchased separately. The first time that you buy the air clean filter, it
is necessary to get the
STK-ARF4B-50
model with frame. When changing
the filter subsequently, it is only necessary to replace the filter itself
(model
STK-F4B-50
).
This air cleaning filter cannot remove harmful gases or vapors nor
ventilate air in the room. You must open doors or windows frequently
when you use gas or oil heating appliances. Otherwise there is a risk of
suffocation in extreme cases.
How to install the air
cleaning filter
The air cleaning filter
needs to be installed
behind the anti-mold filter.
1.
Remove the anti-mold
filter.
2.
Install the air cleaning
filter in the position
shown in the diagram,
with the ‘‘
’’
symbols (meaning
‘‘FRONT’’) facing the
front.
3.
Reinstall the anti-mold filter.
Cleaning the main unit and
remote control unit
•
Wipe clean using a soft, dry cloth.
•
To remove stubborn dirt, moisten a cloth in warm water no hotter
than 40 °C, wring thoroughly, and then wipe.
•
The air intake grille can be removed in order to wash it with water.
Removing and remounting
the air intake grille
•
With the air intake grille
open all the way, grip
both arms with your
hands and pull toward
you to remove.
To remount, hold the air
intake grille roughly
horizontal and push it in
until the arm shafts fit
into the indentations in
the main unit, then fit the
grille into place.
CAUTION
When using a footstool or the like, be careful not to let it tip over.
Washing the grille with
water
•
Clean the grille gently using a soft sponge, or the like. Then wipe
away any remaining moisture.
•
Neutral detergent may be used to remove stubborn dirt. Then rinse
thoroughly with water and wipe away any remaining moisture.
Air
clean
filter
Air intake grille
Arm
22
OI-226-22EG
