OI-378-09EG
9
TIMER ON button
: The air conditioner starts at the set time.
TIMER OFF button
: The air conditioner stops at the set time.
TIMER SET button
This button is used to set the time at which you wish the air conditioner
to go on or off.
MODE selector button
Use this button to select DRY or COOL mode.
(DRY)
: The air conditioner reduces the humidity in the room.
(COOL)
: The air conditioner makes the room cooler.
FLAP button
Press this button either to select to set the airflow direction to one of the
six possible positions manually, or to select the sweep function, which
moves the flap up and down automatically.
: The airflow direction can be set manually. (six positions)
: The flap moves up and down automatically.
To switch to the sweep function (
) when in the manual (
) mode,
hold down the FLAP button.
FAN SPEED selector
: The air conditioner automatically decides the fan speeds.
button
: High fan speed.
: Medium fan speed.
: Low fan speed.
1 HR. TIMER button
: When you press this button, regardless of whether the unit is
(1-HOUR OFF TIMER)
operating or stopping, the unit operates for one hour and then
shuts down.
ACL button
Puts the remote control unit into pre-operation status. Always press this
(ALL CLEAR)
button after replacing the batteries.
ADDRESS switch
• The address switch changes to prevent mixing of signals from remote
control units when two Sanyo air conditioners are installed next to
each other. Normally, the address switch is set to A. When switching
the address, the remote control must be changed, and the jumper
cables on the indoor unit board must be cut. For more information,
please contact the dealer where you made the purchase.
• Normally, the tabs on the remote control unit should not bent.
NOTE
Remote Control Unit (continued)
SAP-K121GJA-oi 3/4/00 16:49pm Page 9
Все каталоги и инструкции здесь:
http
:
//splitoff.ru/tehn-doc.html
