Sanyo PLC-WXU3ST, Руководство пользователя

Страница: 48 / 70

48
Setting
Power management
F o r r e d u c i n g p o w e r c o n s u m p t i o n a s w e l l a s
maintaining the lamp life, the Power management
function turns off the projection lamp when the
projector is not used for a certain period.
When the input signal is interrupted and no button is
pressed for more than 30 seconds, the timer display
with "No signal" appears. The countdown starts to turn
off the lamp.
Select one of the operations:
Ready. . . . . . . . W h e n t h e l a m p h a s b e e n f u l l y
cooled down, the POWER indicator
changes to green blinking. In
this condition, the projection lamp
is turned on if the input signal is
reconnected or any button on the
top control or remote control is
pressed.
Shut down . . . . W h e n t h e l a m p h a s b e e n f u l l y
cooled down, the power is turned
off.
Off . . . . . . . . . . Power management function is off.
Then set the countdown timer with the Point
◄►
buttons.

Note:
• Factory default is "Ready: 5 min."
Time left before Lamp is off.
Power management
Press the SELECT button
at Power management and
this box appears. Choose
one of three settings with the
Point ◄► buttons, and go to
the timer with the Point ▲▼
buttons and set time with the
Point ◄► buttons.