76
Chapter 7 Controlling the projector
Notes on timer setting
✐
Up to 10 timer events can be registered. Timer events always operate according to the next valid event
depending on the projector's power status. In the example below, event 3 turns on the projector so
next event 4 (also turning on projector) will not be effective because the projector is already turned on.
Similarly, when the projector is turned off by event 5, event 6 OFF will not be effective in turning it off
again. But these secondary events (event 4 and event 6) will become effective if a person turns off the
projector (after event 3 and before event 4) or turns on the projector (after event 5 and before event 6).
Event 1
ON
Event 2
OFF
Event 3
ON
Event 4
ON
Event 5
OFF
Event 6
OFF
Projector Power
ON
OFF
OFF
OFF
ON
Invalid event
Invalid event
Time
✐
When the timer events are set at the same time, the last event set will override the previous events. For
example, if there is an event like "ON at 8:00 everyday" and then new event is set like "OFF at 8:00 every-
day", only the last setting event is effective.
✐
When the timer event
ON
occurs during cooling down period, this is invalid event because the projector
cannot be turned on during that cooling down period.
Содержание PLC-WXU30A - 3700 Lumens
