Sanyo PLC-WXU30A - 3700 Lumens, Руководство пользователя

Страница: 50 / 144

50
Chapter 6 Basic setting and operation
Date and time setting
NTP is abbreviated expressions of Network Time Protocol. It is a protocol to acquire the exact current
time via the network. This projector acquires the current time from the NTP server and update the time
in the network module. After setting the NTP address, the projector acquires the time per 24 hours. If
the projector fails acquiring the time from the NTP server, the projector try to acquire the time every 1
hour until it succeeds.
When the NTP address is not set, perform the time setting with "Auto-setting" or "manual setting" de-
scribed below.
Auto setting
Click AUTO button on the page, the date and time set on your computer are set to the projector.
Note:
Confirm that your computer has a correct clock time before performing the auto time setting.
Manual setting
Click the item
Date
or
Time
and enter the date or time on the input
box with adequate format.
Date is in year/month/day format.
ex. 2007/10/05
Time is in 24-hour:minute format.
ex. 18:30
Item Description
NTP address ............. Enter the address of NTP server. Please consult your
network administrator for setting up of the NTP server.
Temperature ............ Switches display temperature unit Centigrade or Fahren-
heit
Time setting ............. When clicking
AUTO
button, the date and time set on
your computer are set to the projector. The timer icon
appears when time is set up correctly.
Current time ............ Indicates current date and time set on the projector
Date ............................Sets date in manual
Time ............................Sets time in manual
This projector does not provide the built-in battery. The date and time information are lost when the
projector turns off ( when "Eco" is set for the stand-by mode (Refer to p.72)), or the network configura-
tion is reset, or the input mode "Wired" or "Wireless" is turned. The timer function is disable until time is
set up correctly. When using the NTP address for time setting, the current time is acquired at the projec-
tor starting up and the timer function is activated after finishing the time setting correctly.