Sanyo PLC-WXL46A, Руководство пользователя

Страница: 82 / 159

13
ENGLISH
*1 Set "On" only when the DHCP server is available on your network environment.
*2 Set [255.255.255.255] if the network does not provide the gateway (router).
*3 Set [255.255.255.255] if you do not use the function E-mail alert.
4. Press SELECT button.
Wired LAN setting screen will appear and selected LAN settings will be displayed. Adjust
each item to the setting environment. Consult your system administrator about the
detailed settings.
Adjust the figures with the Point
54 buttons and move among the items with the
Point buttons.
5. After completing all the settings, select “Set” and press SELECT button. Now, all procedures
have been done. To cancel the adjusted settings, select "Cancel" and press SELECT
button.
You can confirm the LAN settings you have made from “Network Information” (p.14). In
such cases that the LAN cannot be connected, see this screen.
Item Description
DHCP.................... Sets DHCP function On or Off. When you setup the network setting manually, select
"Off". When it is set On, IP address, Subnet, Gateway and DNS are automatically set
according to your network environment
* 1 .
IP address .............Sets IP address of the projector
Subnet ....................Sets Subnet mask. Normally sets 255.255.255.0
Gateway* 2 .............Sets IP address of the default gateway (Router)
DNS* 3 .......................Sets IP address of the DNS server.
Network configuration
Wired setting
Wired LAN setting screen (Example)
Network PIN code
Wired