Sanyo PLC-WXL46A, Руководство пользователя

Страница: 25 / 159

Select either Computer 1 or Computer 2 by pressing the
INPUT button on the top control or the COMPUTER button
on the remote control.
Before using INPUT or COMPUTER button, select the
correct input source through Menu operation as described
below.
Press the MENU button to display the On-Screen
0HQX8VHWKH3RLQWŻŹEXWWRQVWRPRYHWKHUHG
frame pointer to the Input Menu icon.
1
Input Menu
8VHWKH3RLQWŸźEXWWRQVWRPRYHWKHUHGDUURZ
pointer to either Computer 1 or Computer 2, and then
press the SELECT button.
2
After the Source Select Menu appeared for Computer
1, move the pointer to RGB and then press the
SELECT button.
3
Input Menu
COMPUTER button
Computer 1
Computer 2
Input Source Selection
Direct Operation
Menu Operation
Move the pointer (red arrow)
to Computer 1 and press the
SELECT button.
Input Menu icon
Move the pointer (red arrow)
to Computer 2 and press the
SELECT button.
Move the pointer to RGB
and press the SELECT
button.
Source Select Menu
Remote Control
COMPUTER button
3 Note:
•Computer 2 is not displayed when the COMPUTER IN 2/
MONITOR OUT terminal is set as Monitor out (p.44).
•Computer 2 (COMPUTER IN 2/MONITOR OUT) can
accept only the RGB signal.
• When the Input Search function is set On1 or On2, the
input signal will be searched automatically (p.44)
Computer
1
*See Notes at the bottom of this page.
25
Computer Input
*
Top Control
INPUT button
INPUT button
Computer 1
Computer 2
*
Video