Sanyo PLC-EF10B, Руководство по обслуживанию

Страница: 36 / 102

-36-
Optical Adjustments
1. Insert paper etc. in Red and Blue panel to block the
red and blue light so that only green light is projected.
2. Press the ZOOM (+) button to “Wide” position (to
increase image size) and press the FOCUS (+) or (-)
button to make a picture in sharp focus.
3. Insert paper etc. in Red and Green panel to block the
red and green light so that only blue light is projected.
4. Loosen the 4 screws “C” with the 2.0mm hex driver,
see Fig.1c.
5. Insert the slot type screwdriver in the slots
➀
,
➁
,
➂
and
➃
(Fig.1c) and gently turn the screwdriver until
the each corner of screen is in sharp focus. The rela-
tion of adjustment points and screen corners are indi-
cated with
➀
,
➁
,
➂
and
➃
shown in Fig.1c and Fig.2.
6. Tighten the 4 screws “C” and securely attache the Blue
panel unit.
B-FOCUS ADJUSTMENT
1. Insert paper etc. in Red and Blue panel to block the
red and blue light so that only green light is projected.
2. Press the ZOOM (+) button to “Wide” position (to
increase image size) and press the FOCUS (+) or (-)
button to make a picture in sharp focus.
3. Insert paper etc. in Blue and Green panel to block the
blue and green light so that only red light is projected.
4. Loosen the 4 screws “B” with the 2.0mm hex driver,
see Fig.1b.
5. Insert the slot type screwdriver in the slots
➀
,
➁
,
➂
and
➃
(Fig.1b) and gently turn the screwdriver until
the each corner of screen is in sharp focus. The rela-
tion of adjustment points and screen corners are indi-
cated with
➀
,
➁
,
➂
and
➃
shown in Fig.1b and Fig.2.
6. Tighten the 4 screws “B” and securely attache the
Red panel unit.
R-FOCUS ADJUSTMENT
➀
➁
➂
➃
Fig.2
The numbers indicate the focus
effective part when moving the
numbered adjusting slots on
Fig.1.
Fig.1b
➁
➀
➃
Red
LCD
Panel
➂
Green
LCD Panel
Fig.1c
➀
➁
➃
➂
Green
LCD Panel
Blue
LCD
Panel
B
B
B
B
C
C
C
C