32
APPENDIX
CLEANING PLASMA MONITOR
Be sure to disconnect the AC Power cord from AC outlet before cleaning the Plasma Monitor.
Clean your Plasma Monitor as follows:
●
Gently wipe the screen and cabinet with dry soft cloth.
●
The screen is likely to be damaged if it is not maintained properly. Do not use hard objects like a hard cloth or
paper. Do not use solvents or abrasives.
CAUTION :
Do not use benzene, thinner, or any volatile substances to clean the Plasma Monitor. These chemicals may
damage the cabinet finish.
FUNCTIONS OF PRODUCT SAFETY FEATURES
When the temperature of inside the Plasma Monitor becomes high, the cooling fans start operating automatically
and cooling down the Plasma Monitor. Fan's running speed is changed according to the temperature of inside
the Plasma Monitor. When the Plasma Monitor has cooled down, fans stop operating.
When above message is displayed, the internal cooling fan has trouble. This message is displayed for 10
seconds in every 10 minutes. If this message is displayed often, contact sales dealer where you purchased the
Plasma Monitor or the service center.
When the message "Warning! Internal fan is in trouble, not working properly." is displayed.
COOLING FAN
For protecting product safety, protection features provided inside the Plasma Monitor. Each feature operating as
follows:
This function activates due to the temperature inside Plasma Monitor. When the temperature inside Plasma
Monitor exceeds the normal, after displaying a message, Plasma Monitor will be turned off automatically.
When the message "Internal temperature is too high. Set shuts down." is displayed.
INTERNAL TEMPERATURE MONITOR
When this message is displayed, the internal temperature of Plasma monitor exceeds normal. After displaying
this message for 10 seconds, Plasma Monitor will be turned off automatically. When Plasma Monitor cooling
down to normal, Plasma Monitor can be turned on again by pressing POWER button. If this message is
displayed often, contact sales dealer where you purchased the Plasma Monitor or the service center.
AUTO POWER OFF
When a trouble is detected in the Plasma Monitor, the protection function works and turn the Plasma Monitor
OFF automatically. When the Plasma Monitor is turned OFF with this function, the POWER indicator flashes and
Plasma Monitor's power cannot be turned ON.
Disconnect Power cord and contact sales dealer where you purchased the Plasma Monitor or the service
center.
To turn the Plasma Monitor again for checking:
1) Disconnect Power cord from AC outlet and plug it on again.
2) Press POWER button and attempt turn ON Plasma Monitor.
If Plasma Monitor is not turned ON, disconnect Power cord and contact to service center.
