70
Appendix
Problem
Solutions
Pages
Image
Image is out of focus.
Q
Adjust focus of the projector.
25
Q
Provide proper distance between the projector and the
projection screen.
15
Q
Check the projection window to see if it needs cleaning.
66
Q
Moving the projector from a cool to warm place may result in
moisture condensation on the projection lens. In such cases,
leave the projector off and wait until condensation evaporates.
Picture is not bright enough.
Q
Check if the
Contrast
or
Brightness
is adjusted properly.
37, 44
Q
Check if Image mode is selected properly.
36
Q
Check the lamp control function.
28, 58
Q
Check the LAMP REPLACE indicator. If it lights, the end of
lamp life is approaching. Replace the lamp with a new one
promptly.
67
The color is strange.
Q
Check the Input signal, color system, video system or
computer system mode.
Q
Make sure the
Colorboard
is not selected on Screen Menu.
40, 47
The image is distorted or runs
off.
Q
Check
PC adjustment
Menu or
Screen
and adjust them.
34-35,
38-40
Setting and adjustment
Auto PC adjustment function
does not work.
Q
Check the Input signal. Auto PC function can not work when
480p
,
575p
,
720p
,
480i
,
575i
or
1080i
is selected, or when the
digital signal is input into HDMI terminal.
32, 33
Some displays are not seen
during the operation.
Q
Check the Display function.
53
The setting does not remain
after turning off power.
Q
Make sure you selected
Store
after adjusting setting. Some
settings can not be stored if not registered with "Store".
37, 45
Power management does not
work.
Q
Power management function can not work while
Freeze
or
No
Show
is running.
57
Capture function does not
work.
Q
Check the connection and the input signal to see if there is
signal
54
Auto setup does not work
properly.
Q
Make sure
Off
is not selected at any function of
Auto setup
51
Top control does not work.
Q
The top control is not available if the top control is locked at
Key lock under Security of SETTING section.
59
Remote control
The remote control does not
work.
Q
Check the batteries.
Q
Make sure no obstruction is between the projector and remote
control.
Q
Make sure you are not too far from the projector when using
the remote control. Maximum operating range is 16.4'(5 m).
Q
Make sure the code of the remote control is conformed to the
projector’s code.
58
Q
Unlock the Key lock function for the remote control function.
59
Содержание PDG-DXL2000 - 2000 Lumens
