Sanyo PDG-DXL2000 - 2000 Lumens, Руководство пользователя

Страница: 60 / 142

60
Setting
Use the Point 54 buttons to select Off , On 1 or On 2 .
Press the SELECT button to close the dialog box.
Change the PIN code lock setting
Enter a PIN code
Use the Point
54
buttons to enter a number. Press the
Point button to fix the number and move the red frame
pointer to the next box. The number changes to
;
. If you
fixed an incorrect number, use the Point button to move
the pointer to the number you want to correct, and then
enter the correct number.
Repeat this step to complete entering a four-digit number.
After entering the four-digit number, move the pointer to
Set . Press the SELECT button so that you can start to
operate the projector.
If you entered an incorrect PIN code, PIN code and the
number ( ;;;; ) will turn red for a moment. Enter the
correct PIN code all over again.
Enter a PIN code
The PIN code can be changed to your desired four-digit
number.
Press the Point
4
button to select PIN code change and
press the SELECT button. The Current PIN code dialog box
appears.
Use the Point
54 buttons to set the current PIN code. The
New PIN code dialog box appears. Set a new PIN code, the
confirmation box appears, and choose
Yes to set the new
PIN code.
Change the PIN code
CAUTION:
WHEN YOU HAVE CHANGED THE PIN CODE, WRITE
DOWN THE NEW PIN CODE IN COLUMN OF THE
PIN CODE NO. MEMO ON PAGE 80, AND KEEP IT
SECURELY. IF YOU FORGET YOUR PIN CODE, THE
PROJECTOR CAN NO LONGER BE STARTED.
PIN code change