PDG-DHT8000L Expand Serial Command Functional Specifications
40/101
8.9.8 CF_PIPMODE Command
Command
“CF_PIPMODE_%1” [CR]
%1
“PINP” -------------------- Select P in P mode
“PBYP” ------------------- Select P by P mode
Details
Set mode of ”Picture in Picture”. (Available only in the normal Power ON status)
Acceptable
“000” [CR]
Response
Unacceptable
“Error Code” [CR]
8.9.9 CF_PIPMAININP Command
Command
“CF_PIPMAININP_%1_%2” [CR]
%1
“1” -------------------- Select Input 1
“2” -------------------- Select Input 2
“3” -------------------- Select Input 3
“4” -------------------- Select Input 4
%2
“DIGITAL” ---------------- Select DVI Input
“ANALOG” --------------- Select Analog Input
“VIDEO” ------------------- Select Composite Video Input
“S-VIDEO” ---------------- Select S-Video input
“YPBPR” ------------------ Select Y/Pb/Pr Input
“YCBCR” ------------------ Select Y/Cb/Cr Input
“SDI1” --------------------- Select SDI 1 Input
“SDI2” --------------------- Select SDI 2 Input
“SCART” ------------------ Select SCART Input
“HDCP” -------------------- Select HDCP Input
“HDMI” -------------------- Select HDMI Input
Details
Select input and source of Main picture of “Picture in Picture”. (Valid only when in
the normal Power ON status.)
*
In the case of a specific status, return Error Code “101” [CR] and the
command is not executed.
- When selected Source does not meet the requirement for Input
- When transmitted command of the input without inserting Board in Input3
or Input4
- When selected Input / Source which was impossible of choice by limit of
Picture in Picture
Acceptable
“000” [CR]
Response
Unacceptable
“Error Code” [CR]
