30
RECYCLE OF NICKEL-CADMIUM BATTERY
MDF-U5186S
The unit contains a rechargeable battery. The battery is recyclable. At the end
of it’s useful life, check with you local solid officials option or proper disposal.
This product has an electric battery.
Please recycle it for effective utilization of resources and protection of our
environment.
Thank you for your cooperation.
Label indication is obliged to comply with Taiwanese battery regulation.
1. Location of a nickel-cadmium battery
This unit is provided a nickel-cadmium battery for the power failure and temperature warning device.
The battery is located in the control box behind the control panel. (Fig. 1)
2. Removal of nickel-cadmium battery
1) Turn off the power switch and battery switch, and disconnect the power supply plug.
2) Remove 2 screws (A) fixing the grille to take off the grille. To remove the control panel assy,
remove 2 screws (B) and then remove 4 screws (C) fixing the assy. (Fig. 2)
3) Loosen 2 screws (D) and then remove 1 screws (E) to sliding off the control box cover (Fig. 3)
4) Disconnect the battery connector and remove 2 screws (F) fixing the clips. (Fig. 4)
5) Take out the battery.
3. Handling of battery
Cover the battery terminal with an insulating tape to avoid the short circuit. Then follow the procedure
for recycling or proper disposal.
廢電池
請回收
Fig. 1
Fig. 2
Connector
Battery
Screw A
Screw D
Battery
Screw B
Screw C
Screw E
Control box
cover
Control box
Fig. 3
Fig. 4
Screw F
