27
RECYCLE OF NICKEL-CADMIUM BATTERY
MDF-U2086S
The unit contains a rechargeable battery. The battery is recyclable. At the end
of its useful life, check with your local solid officials option or proper disposal.
This product has an electric battery.
Please recycle it for effective utilization of resources and protection of our environment.
Thank you for your cooperation.
Label indication is obliged to comply with Taiwanese battery regulation.
1. Location of a nickel-cadmium battery
This unit is provided a nickel-cadmium battery for the power failure and temperature warning device.
The battery is located in the electrical box inside the cover. (Fig. 1)
2. Removal of nickel-cadmium battery
1) Turn off the power switch and battery switch, and disconnect the power supply plug.
2) As shown in the Fig. 2, remove 4 screws fixing the side cover by using a screw driver.
3) Remove 4 screws fixing the electrical box cover by using a screw driver. (Fig. 3)
4) Disconnect the battery connector and remove 2 clips securing the battery by removing the screws.
(Fig. 4)
5) Take out the battery.
3. Handling of battery
Cover the battery terminal with an insulating tape to avoid the short circuit. Then follow the procedure
for recycling or proper disposal.
廢電池
請回收
Fig. 2
Side cover
Fig. 3
Electrical box
Fig. 4
Connector
Clip
Fig. 1
Electrical box
