VARIOUS SETTING
(
MENU/Log
)
The operation of the hyper-terminal on the PC side
1.
Transmission starts when a transfer, a capture of the text and a preservation file name are specified
and MENU/Start is selected.
2.
The transmission is finished, with “Finished” indication.
Setup of communication: Log data receipt on the PC side (In case of Windows 2000 and XP)
1.
Start a program-accessories-communication-hyper-terminal from the starting button. The registration of
the starting menu is to start in the following method, C : Start from ¥Program Files¥ Windows
NT¥hypertrm.exe.
2.
Set up the following through the hyper-terminal screen.
●
New connection Name (Example) Sanyo
●
Setup of the connection Connection port COM1
●
Properties of COM1 Setup of the port
●
Bit/sec.: 9600 Data bit: 8 Parity: No Stop bit: 1 Flow control: Xon/Xoff
(When a log transmitting screen is opened, terms of communication on the MDF side are set on the
above condition automatically.)
3.
The communication cable for the interface board MTR-480 of the option and 9 pin Dsub cross type for
RS232C is necessary for the data transmission to the PC. Refer to P. 40 for the details.
19
