EN-16
Changing a programme
To change a MP3/WMA file
1. In the stop mode, press the MEMO/CLK
ADJ
button (or the MEMO/
CLOCK
button
on the remote controller) repeatedly until the
MP3/
WMA
fi
le number to be replaced is dis-
played.
2.
Press the
F
or
B
button to select a MP3/
WMA
fi
le as described above.
3. Press the MEMO/CLK ADJ button (or the
MEMO/
CLOCK
button on the remote con-
troller).
To add a new MP3/WMA file to a programme
1. In the stop mode,press the MEMO/CLK
ADJ button (or the MEMO/
CLOCK
button on
the remote controller) repeatedly until ”
p---XX
”
fl
ash.
Example:
2. Press the
F
or
B
button to select a MP-
3/ WMA
fi
le as described above.
3. Press the MEMO/CLK ADJ button (or the
MEMO/
CLOCK
button on the remote con
troller).
Note:
Programmed details cannot be partially deleted
or inserted.
Repeat playback
Please refer to the same description of “MP3/
WMA CD operation” on page 1
1.
Folder selection
Please refer to the same description of “MP3/
WMA CD operation” on page 1
1
.
Note:
Other various playback operations,please refer
to the related description of “AUDIO CD OPERA-
TION” (page
9
~1
1
).
Removing the SD/MMC card
1. Press the
STOP
C
/BAND
(or the
stop
C
button
on
the remote controller).
2. Push the card slightly into the slot to release.
(see Fig.1b.)
3. Pull it out.
Notes on handling SD/MMC cards
- Do not expose the SD/MMC card to direct
sunlight, humidity or high temperatures for
extended periods of time.
- SD/MMC cards should be returned to their
cases after use.
- Do not try to decompose the SD/MMC cards.
- Keep the original SD/MMC label and never try
to
ap
ply any new paper on it.
- Do not touch the metal terminal part of the SD
/MMC
card.
Metal terminal part
(Back)
