EN-6
PRECAUTIONS
- The apparatus shall no be exposed to drip-
ping or splashing.
- Do not use where there are extremes of
temperature (below 5°C or exceeding 35°C),
or direct sunlight may strike it.
- Because of the CD player’s extremely low
noise and wide dynamic range, there might
be a tendency to set the volume on the
ampli
f
er unnecessarily high, Doing so may
produce an excessively large output from
the ampli
fi
er which could damage your
speakers.
- Sudden changes in the ambient temperature
may cause condensation to form on the
optical lens inside the unit. If this happens,
take out the disc, leave the unit for about 1
hour, and then proceed to operate.
- When carrying the unit, be sure to remove
any disc which may be inside and turn the
power off. Wait at least 10 seconds, then
proceed to operate.
- The system’s speakers use powerful mag
nets. Do not place time-pieces, credit cards,
cassette tapes or video tapes, etc. near the
speakers.
- Do not install this equipment in a con
fi
ned
space, such as a bookcase or built in cabi-
net.
- No object
fi
lled with liquids, such as vase,
shall be placed on the apparatus.
- Where the mains plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
-
“To be completely disconnect the power input, the
mains plug of apparatus shall be disconnectedfrom
the mains.”
-
“The mains plug of apparatus should not be obstructed
OR should be easily accessed during intended use.”
-
“Excessive sound pressure from earphones and
headphones can cause hearing loss.”
-
“Battery shall not be exposed to excessive heat such
as sunshine, fire or the like.”
Note:
This handling description is printed prior to product
When a part of the product speci
f
cation must be
changed to improve operability or other functions,
priority is given to the product speci specification itself,
In such instances, the instruction manual may not
entirely match all the functions of the actual product.
Therefore, the actual product and packaging, as well as
the name and illustration, may differ from the manual.
The LCD display shown as an example in this manual
may be different from the actual LCD display.
CONNECTIONS
Note:
- Do not connect the mains lead to an AC out-
let until all connection have been made.
- The system is not completely disconnected
from the mains when the /on button is set
to the position(standby mode).
BACK OF THE UNIT (Fig, 1a)
Speakers
Connect the left speaker wire to the “L” SPEAK-
ERS terminal and the right speaker wire to the
“R”SPEAKERS terminal.
The speaker grill can be remove or attach as
desired.
Aerials
FM aerial
In areas close to a transmitter, the simple indoor
aerial is suf
fi
cient to receive broadcasts.Unwind
the aerial wire, then extend it is as straight as
posssible and while listening to the sound from
the system ,secure it in a position where the best
FM reception in found.
AM loop aerial
Assemble the loop aerial as shown in Fig .1a.
Unwind the aerial wire, then connect it to the AM
LOOP socket. Place the loop aerial in a position
which yields the best AM reception, or attach it to
a wall or other surface as shown in Flg.1a.
FRONT OF THE UNIT (Fig. 1b)
Headphones
Connect the stereo headphones (not supplied)
to the PHONES socket for monitoring or for pri-
vate listening.
Auxiliary equipment
Connect the audio cable (not supplied) from the
audio output socket of a auxiliary equipment to
the LINE IN socket.
development.
