![background image](http://html.mh-extra.com/html/sanyo/lcd-32xa2/lcd-32xa2_instruction-manual_361157017.webp)
17
17
Menu Operation
Semi-auto T
Semi-auto T
uning
uning
This is used to preset a channel in any pro-
gramme position.
1
1
Select “Prog. Preset” with
in the
Preset menu.
Preset
Preset
Swap
Fine Tuning
Auto Tuning
>
P
P
< >
Prog. Preset
>
- - -
Semi
Semi
Sound
P
P
System
BG
Auto
007
Position
Frequency
271.65 MHz
Fine T
Fine T
uning
uning
Preset
Preset
Swap
Auto Tuning
>
P
P
Prog. Preset
>
Fine Tuning
< >
- - -
2
2
Press and hold
or
to fine tune a
channel.
3
3
Press the MENU button to exit.
The tuning will be stored when you exit
the menu.
Any changes made by fine tuning will
remain even when the TV set is turned off.
3
3
Select “Position” with
.
To select desired programme position:
Press the Digit (-/--) button and enter
the position number (000-254) using 0-9
buttons.
or
Press
to select programme
position sequentially.
6
6
Select “Memory” with
, and press the
OK button to memorize.
7
7
Press the MENU button to exit.
Repeat steps 3-6 to store other channels in
other programme positions.
•
If the clear picture cannot be obtained,
change the colour system with
or
.
•
If the sound is not clear or no sound is
produced, change the sound system
with
or
.
1
1
Select “Fine Tuning” with
in the
Preset menu.
2
2
Press
to enter the Semi-auto Tuning
mode.
Semi
Semi
Sound
Skip
P
P
System
Memory
OK?
OFF
BG
Auto
010
Position
Frequency
273.25 MHz
5
5
You can either...
a) Press the Digit (-/--) button, and enter
the frequency (5 digits) using 0-9
buttons referring channel table.
b) Press and release
(toward the lower
frequency) or
(toward the higher
frequency) to search a TV station.
Once a station is found, tuning will stop
automatically. Repeat until desired
station is found.
Semi
Semi
Sound
Skip
P
P
System
Memory
OK?
OFF
BG
Auto
010
Position
Frequency
273.25 MHz
4
4
Select “Frequency” with
.
Inst. Manual_N2WW(UE2-A) 5/30/05 3:08 PM Page 17