6
Need help?
Visit our Web site at
www.sanyoctv.com
or Call
1-800-877-5032
NOTES:
The on-screen message for digital search will appear with a
progress bar and percentile number displayed across the
bottom of the screen (to indicate activity) as the search process
continues.
Channel information found during the channel search is
stored in the Channel Scan Memory database. After the All
Channel Search is completed, the DTV will tune to the lowest
Digital channel or lowest Analog channel if no digital channels
are found.
If the DTV does not detect any digital or analog channels, a
message advising the
viewer to check the
cables and antenna
connections will ap-
pear. In this case, you
must press the
CHANNEL UP
(
CH
)
key again to repeat
the channel search
process. If after two searches the DTV still fails to detect any
channels, the DTV will tune to analog channel 3.
These two
channel searches are necessary even if you plan to use
the DTV only as a monitor.
If no analog or digital channels are found after the
second search,
All Channel Search will default to off-air
analog channels 2 through 69 and digital channel D3-1. Select
analog channels using the remote control keypad. See
page 12, item number 2.
4
ANALOG ANTENNA SIGNAL (Optional)
To change the initial ANALOG tuning system
setup (from antenna to cable or cable to antenna),
use the on-screen menu. See “Analog Antenna
Signal” on page 16.
2
INSTALL TWO “AAA” BATTERIES
IMPORTANT NOTE: Spent or discharged batteries must be recycled
or disposed properly in compliance with all applicable laws. For
detailed information, contact your local County Solid Waste
Authority.
•
Install two “AAA” Batteries (not
included) so that the “+” and
“–” marks on the batteries
match the “+” and “–”
marks inside the Remote.
To review the Remote
functions, go to
pages 12 ~ 13.
NOTE: Use two “AAA”
Alkaline batteries.
Remove the batteries if the remote control will not be used for a
month or more. Weak batteries may leak and cause damage.
(Normal battery life is roughly six months.)
If batteries have leaked in the Remote Control Unit, carefully wipe
the case clean and load new batteries.
3
ALL CHANNEL SEARCH
When the television is powered on for the first
time, it automatically checks for the presence of an
RF signal.
•
Press the
POWER
key to
turn on the DTV.
•
Then press the
CHANNEL
UP
(
CH
) key to automat-
ically search for available
channels: Digital (ATSC)
and Analog (NTSC).
The All Channel Search con-
tains two processes that are
executed simultaneously for
digital and analog channels.
1
4
5
6
7
8
0
9
2
3
INPUT
INFO
RECALL
MENU
CAPTION
EXIT
VOL
ENTER
TUNER
MUTE
SLEEP
1
4
5
6
7
8
0
9
2
3
INPUT
INFO
RECALL
MENU
CAPTION
EXIT
VOL
ENTER
TUNER
MUTE
SLEEP
CH
POWER
