background image

30

"

Wide Flat Screen 

Trilingual Menu Options (English, Spanish, or French)

Built-in Digital and Analog Tuners

Automatic Channel Search 

3-Line Digital Comb Filter (for better picture detail)

V-Chip for Movies and TV guidelines rating limits (parental control)

Closed-Captioning: Analog EIA-608B  

Digital EIA-708B

Audio Modes: 

Digital—Main and Sub
Analog—Stereo, Mono, and SAP

Tone 

Front speakers (two): 5 x 9 cm

Factory preset adjustments for picture/sound

Picture Shape: PIX1, PIX2, PIX3, and PIX4

Audio Format: Dolby

®

Digital for ATSC (DTV) and Analog for NTSC

Receivable Formats: Digital Tuner for ATSC terrestrial broadcasts 
and nonscrambled (ClearQAM) cable channels. 

NTSC analog tuner for VHF/UHF or CATV

Channel Scan Memory 

Receives 181 Analog Channels (VHF 2~13 and 
UHF 14~69;  Cable 14~125);  and 99 Digital Channels

HDMI (High-Definition Multimedia Interface) Input with
HDCP (High-bandwidth Digital Content Protection) 

RF Antenna Input Jacks: Digital and Analog

Component Video Input (Two Sets)

Rear Composite AV Input 

S-Video Input 

Optical Digital Audio Out

Fixed Analog Audio Out 

XDS (Extended Data Services) displays station call letters, 
title of show, and ratings when broadcast

Sleep Timer (3 hours)

32-Key Remote Control

FEATURES

SPECIFICATIONS

Picture Tube Size (Measured Diagonally):

30

"

Wide Flat Screen

Scanning Format: 

1080i (All Signals are Converted to 1080i)

RF Antenna Input:

Analog–UHF/ VHF/CATV 75 ohm 

Digital–75 ohm 

Power Requirement:

Source: AC 120V, 60Hz

Power Consumption:

140 Watts (Average)

Sound:

Two Speakers, size: 5 x 9 cm

Amplifier:

Built-in with 5.0W/ch

Jacks / Connectors:

INPUT1:

Composite Video and Audio R / L

S-Video

INPUT2

Component (Y/ Pb / Pr) with Audio R/L Input

INPUT3:

Component (Y/ Pb / Pr) with Audio R/L Input

Digital Audio Output:

Dolby

®

Digital (Optical) 

Analog Audio Output:

Audio R / L

HDMI Input:

19-pin connector (Picture /Sound with 

HDCP)

Size and Weight (approximately):

Horizontal Dim. (Width):

34.6 in. (878mm) 

Vertical Dim. (Height): 

22.6 in. (573mm)

Depth Dim. (Thickness):  21.6 in. (549mm)

Weight: 

114.1 (lbs.) 51.8 (Kg)

Specifications are subject to change without notice.

CAUTION: FCC Regulations state that improper modifications or un-

authorized changes to this unit may void the user’s authority
to operate the unit.

Trademarks Information:

Manufactured under license from Dolby Laboratories. 

Dolby

and the double-D symbol are trademarks of Dolby Laboratories

.

4

Need help? 

Visit our Web site at  

www.sanyoctv.com

or Call 

1-800-877-5032

This symbol on the nameplate means the product is
Listed by Underwriters’ Laboratories Inc. It is designed
and manufactured to meet rigid U.L. safety standards
against risk of fire, casualty and electrical hazards.

with a double “Z” is a registered trademark of

Sanyo Manufacturing Corporation.

Содержание HT30746

























Отзывы: