This is the best option for picture and sound! Using the
HDMI connection, which has high-definition content pro-
tection, provides you with uncompressed digital video and
audio, Dolby
®
Digital 5.1 or PCM sound. This connection
requires only one cable.
As Real As It Gets!
CONNECTING EXTERNAL EQUIPMENT TO
HDMI (INCLUDES HDCP COPY PROTECTION)
To avoid problems with some brands of external equip-
ment, follow this procedure when connecting cables and
powering on your equipment.
1
4
5
6
2
3
POWER
INPUT
What you will need for connections:
19 Pin HDMI Digital Cable – 1
(Make sure you check the pin configura-
tion of the cable plug-end*)
*Adapter may be required. Check with
your local electronics store.
DIGITAL AV CONNECTIONS
REMOTE CONTROL
SET-TOP BOX
(Can be a Digital Satellite
Receiver, DVD Player, or similar digital device.)
BACK VIEW
OF DTV
1
Switch off DTV and external equipment before con-
necting cable.
(Cable is not supplied.)
2
Connect the external equipment’s high bandwidth
HDMI Output to the DTV’s HDMI Input.
3
The DTV must be turned on first, press
POWER
. Then
turn on your external equipment.
4
Press
INPUT
to select
HDMI
to view a
digital program.
If the television HDMI pin configuration is different from the pin config-
uration on your set-top box, you will need to use an Adapter.
Press the INPUT key after connecting cables to access the AV Inputs.
There is NO need to tune to a blank channel.
With a DVI connection, make sure you connect Audio out to the TV’s
INPUT3 Audio in.
Because the INPUT3 audio jacks are used to receive the audio from the
DVI device, these video jacks cannot be used when a DVI device is
connected.
HDMI CABLE
(Gently insert
cable into TV
HDMI Input
jack.)
9
Need help?
Visit our Web site at
www.sanyoctv.com
or Call
1-800-877-5032
4
2
3
CONNECTING STB WITH DVI OUTPUT TO
HDMI INPUT
1
Switch off DT V and external equipment before con-
necting cable.
(Cable is not supplied.)
2
Connect the STB DVI Output to a “DVI to HDMI
Cable;” then connect the cable to the DTV’s HDMI
input.
NOTE: Check with your local electronics store for a
DVI to HDMI Cable that matches your equip-
ment and the DTV.
3
Connect the STB Audio R / L
to the DTV’s
INPUT3 Audio R / L .
4
The DTV must be turned on first, press
POWER
. Then
turn on your external equipment.
5
Press
INPUT
to select
HDMI
to view a digital program.
BACK VIEW
OF DTV
2
3
SET-TOP BOX (Can be a Digital Satellite
Receiver, DVD Player, or similar digital device.)
What you will need for
connections:
DVI to HDMI Cable – 1
Audio Cable – 1
1
4
5
6
2
3
POWER
INPUT
REMOTE CONTROL
5
4
IMPORTANT NOTE FOR MONITOR USE:
If you did not connect an antenna, you
must
run All
Channel Search twice before you can select the AV inputs.
