Sanyo HEC-DR8700 Скачать руководство пользователя страница 20

Страница: 20 / 36

MASSAGING (WHOLE BODY SENSOR AUTOMATIC COURSES) (continued)

Measurement of shoulder position

(Sit deeply on the massage chair and raise your head slightly. The matching of the position of

shoulders may not be possible if the head is leaning on the back rest.)

Decides the position of shoulder.

Massaging rollers move up and down to measure the position of shoulder.

Massaging operation at recognized position of shoulder.

Check that massaging rollers match the position of your shoulder. If not, when the lamp of

is flickering (a beep sounds), adjust the position by pressing the ROLLER POSITION buttons.

(Remote control display)

The massaging rollers are moved up or down by approx. 1 cm (

) each time

the ROLLER POSITION button is pressed.
When it is difficult to adjust with ROLLER POSITION button, move your body for
adjustment. The height that can be adjusted is between approx. 150 (59

)

to 180 cm (71

Massaging rollers

Position too high

Position too low

Appropriate position

Stiffness is measured.

Sensors

①

Grip the sensor controller with your fingers (with one hand) so that three

sensors are touched.

②

●

Be sure to place your fingers (hand) on the sensor.

The degree

of stiffness cannot be measured if your fingers (hand) are not

placed on the sensor. (If your fingers (hand) are not gripping

the sensor, “Grip the sensor” on the remote control will be

illuminated. (The icon lights up when the user is being

measured.)) If your fingers (hand) are not touching the sensor

points, massages will be carried out according to the standard

operation of the selected course.

Rear of sensor controller

Measure the position of shoulder.

Check if the position of shoulder is correct. If not, adjust the position using the ROLLER POSITION

buttons. (The ROLLER POSITION buttons can also be used while massaging is in progress.)

Sensors

How to grip the sensor controller

when the icon is shown on

the remote control display

How to grip the sensor controller

when the icon is shown on

the remote control display

③

Sensor massaging will start.

Measures the degree of stiffness in each part of body with the sensor and informs of the degree of stiffness.

The explanation uses stiffness as an example.

SENSOR MASSAGE

Measurement of the degree of stiffness.

Displays the aim of massaging positions, the stiffness, body pressure and the remaining massaging time on the remote control.

The sensor will display the positions of stiffness

(those where stiffness has been detected) by

measuring the amount of perspiration from your

hand in reaction to sensor massage.

Displays the position where the

stiffness has been detected.

Body areas that can be massaged.

Areas where a high degree of stiffness has been detected.

Areas where a low degree of stiffness has been detected.

Before gripping the sensor

After gripping the sensor

Содержание HEC-DR8700





































Результаты поиска

Содержание HEC-DR8700

Отзывы:

Похожие инструкции для HEC-DR8700

Бренды по названию

Популярные бренды

Sanyo HEC-DR8700, Инструкция по эксплуатации

Результаты поиска

Содержание HEC-DR8700

Отзывы:

Похожие инструкции для HEC-DR8700

Бренды по названию

Популярные бренды