Sanyo HEC-DR8700 Скачать руководство пользователя страница 34

Страница: 34 / 36

TROUBLE-SHOOTING

Type of Trouble

Movement of massaging rollers in upward

direction, causing operation to stop.

Check points

Countermeasure

Operation failure

Sounds and sensations during operation

Courses other than Air Course cannot

be selected.

●

・

Rattling sound during tapping

・

The sound of massaging rollers moving up and

down and the sound of kneading operation

(Knocking, clinking, rubbing or whistling sounds)

・

Creaking sound caused by massaging rollers

and cloth during massaging operation.

・

Gear meshing sound

・

Wobbling of the foot rest

・

Creaking or sliding sounds when reclining

・

Sound of air massaging

Whooshing sound (switching valve sound)

Hissing or blowing sound (air exhaust sound)

Sounds from the pump operating

Sound of the air bag filling up

・

Small sounds and shocks coming from the massaging

rollers when massaging near the waist

・

Bouncing movement of the massaging rollers when

they move from the back to the shoulder

Sounds and sensations such as the following may occur while the massager is operating,

but these occur as part of the normal mechanism of the massager and are not the signs of

a malfunction. (They have no effect on normal functioning.)

WARNING

Check that the power plug is securely plugged into

the outlet.
Check that the POWER switch is set to the ON position.

If the trouble still persists even after the following proper countermeasures have been taken, stop using the

massager to avoid possible accidents. Disconnect the power plug from the outlet and consult an authorized

service center. Do not attempt to repair the equipment at home by yourself, as it is very dangerous.

Push the power plug into the outlet securely. (See page 11)

Press the POWER switch to the [ON] position. (See page 11)

Make sure that no more than one button is being

pressed at any one time.

Please press each button separately.

After adjusting the angle of back rest, select the

massaging button. (See page 13)

This phenomenon is caused by the operation of the timer, but is not a problem.

Reclining is not possible. The foot rest

cannot be raised or lowered.

Is it being obstructed by something?

Remove the obstruction.

The foot rest cannot be extended.

Check if you attempt to adjust the foot rest with

the foot rest slide lever pulled.

Adjust the foot rest with the foot rest slide lever

pulled. (See page 15)

The foot rest cannot be stored.

Check that the foot rest is not extended.

Return the foot rest by pulling the foot rest slide

lever. (See page 15)

You feel discomfort during the operation of

reclining. (Move toward the opposite direction

temporarily, or do not move smoothly.)

This operation is conducted for safety, but is not a problem.

This phenomenon is caused by the adoption of the function of alternative tapping on the right and

left sides, but is not a problem.

The position of massaging rollers differ

between right and left.

Check if your fingers (hand) are placed on the sensor. Place your fingers (hand) on the sensor. (See page 18)

Massage in relaxed condition as much as possible. The degree of stiffness may not

be measured correctly when the user massages immediately after taking a bath or

is given stimulation other than sensor massage, like watching TV.

Check your skin for dryness.

Press the SENSOR ADJUST button.(See page 18)
Slightly moisten your hand using hand cream and

place the fingers (hand) on the sensor again.

If people who are heavier than the maximum weight (120 kg (265 lbs) or more) use the

massager, it may stop operating suddenly.

The “Grip the Sensor” indicator remains

on the remote control display, preventing

stress/stiffness measurement.

NOTE

The display of stress and stiffness differs

from the degree of stress and stiffness

actually felt.

The measurement result indicates the stress and stiffness according to the body's biological reaction

to the sensor massage, so it may differ from the stress and stiffness the user actually feels.

Check if the chair is set to the BEST POSITION 2 or 3.

The operation stops in the middle of

massaging in the Whole Body Sensor

Automatic Course or Automatic Course

When the massaging rollers detach from the

body, the body pressure sensor will work to

stop the operation automatically.

Begin the operation again from the start.

Содержание HEC-DR8700





































Результаты поиска

Содержание HEC-DR8700

Отзывы:

Похожие инструкции для HEC-DR8700

Бренды по названию

Популярные бренды

Sanyo HEC-DR8700, Инструкция по эксплуатации

Результаты поиска

Содержание HEC-DR8700

Отзывы:

Похожие инструкции для HEC-DR8700

Бренды по названию

Популярные бренды