Sanyo HEC-DR8700 Скачать руководство пользователя страница 31

Страница: 31 / 36

WARNING

●

①

②

③

■

Perform daily maintenance by wiping with a soft dry cloth.

When they are badly soiled, adopt the following maintenance procedure:

Soak a soft cloth in

diluted neutral kitchen

detergent and

squeeze it well.

Wipe the main unit

with the damp

cloth in a tapping

motion.

MAINTENANCE PROCEDURES

Be sure to disconnect the power plug from the outlet prior to maintenance.

●

NOTE

Do not wash the head rest or the back pad.

This may cause discoloration or deformation.

Do not attempt to use benzene, thinner, alcohol, alkaline detergent or bleaching agent for cleaning

as this may result in deformation, discoloration or cracking.

Soak a cloth in clean water, and

squeeze it well.

Wipe off the remaining detergent

with the damp cloth.
Wipe it with a dry cloth afterwards.

＊

Do not force-dry with a drier.

＊

Do not make contact with synthetic leather

products for an extended period.

It may cause discoloration.

HEAD REST, BACK PAD, SEAT COVER, ARM REST (SYNTHETIC LEATHER PARTS)

●

Soak a soft cloth in diluted neutral kitchen detergent, and squeeze it well.
Wipe the main unit with the damp cloth, and wipe it with a dry cloth afterwards.

MAIN UNIT (Cloth,plastic parts and frame), REMOTE CONTROL, SENSOR CONTROLLER

Содержание HEC-DR8700





































Результаты поиска

Содержание HEC-DR8700

Отзывы:

Похожие инструкции для HEC-DR8700

Бренды по названию

Популярные бренды

Sanyo HEC-DR8700, Инструкция по эксплуатации

Результаты поиска

Содержание HEC-DR8700

Отзывы:

Похожие инструкции для HEC-DR8700

Бренды по названию

Популярные бренды