Sanyo HD10 - NextVision - HDTV Tuner, Руководство пользователя

Страница: 38 / 52

38
SETTING
Lamp counter reset
Key lock
Factory default
Press POINT UP/DOWN button to move a red frame pointer to
“Factory default” and then press SELECT button. The message
"Return to Factory default?" is displayed. Move the pointer to [Yes]
and then press SELECT button.
Another confirmation dialog box appears and select [Yes] and then
press SELECT button. Return the projector to Factory default.
This function returns all setting values except for the lamp counter to
the factory default settings.
This function locks the operation of the projector's control panel and
the remote control.
This locks operation of the projector's control panel.
This locks operation of the remote control.
This cancels the Key lock function.
If the projector's control panel accidentally becomes locked and you
do not have the remote control nearby, turn the MAIN ON/OFF
switch to OFF. And then while pressing a SELECT button, return the
MAIN ON/OFF switch to ON again. This will cancel the projector's
control panel lock.
Be sure to reset Lamp Counter when Lamp Assembly is replaced. When Lamp Replace Counter is reset, LAMP
REPLACE indicator stops lighting.
Turn projector on, press MENU button and ON-SCREEN
MENU will appear. Press POINT LEFT/RIGHT button(s) to
move a red frame pointer to SETTING Menu icon. 1
Press POINT DOWN button to move a red frame pointer to
“Lamp counter reset” and then press SELECT button. 2
Do not reset Lamp Replace Counter except after Projection lamp is
replaced.
Another confirmation dialog box appears and select [Yes] to
reset Lamp Replace Counter. 4
Move arrow to replaced lamp number (Lamp 1, Lamp 2, Lamp 3
or Lamp 4) and then press SELECT button. Message "Lamp
replace counter Reset?" is displayed. Move pointer to [Yes] and
then press SELECT button. 3
NOTE: Be sure to reset correct lamp number otherwise LAMP
REPLACE indicator continues lighting.
Closes SETTING MENU.
Quit