Sanyo HD10 - NextVision - HDTV Tuner, Руководство пользователя

Страница: 25 / 52

25
BASIC OPERATION
When connect component video output (Cr, Y, Cb or Pr, Y, Pb) from
video equipment to R/Pr, G/Y and B/Pb jacks.
WHEN SELECT INPUT 2 (5 BNC TERMINAL)
WHEN SELECT INPUT 1 (SDI TERMINAL )
Input 1
INPUT MENU
SELECTING INPUT SOURCE
MENU OPERATION
DIRECT OPERATION
Select INPUT source by pressing INPUT 1/2 and INPUT 3/4
buttons on Side Control or INPUT 1, INPUT 2, INPUT 3 and
INPUT 4 on Remote Control Unit.
Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT buttons to select Input and press SELECT
button. Another dialog box INPUT SELECT Menu will appear.
Press POINT DOWN button and a red-arrow icon will appear.
Move arrow to INPUT source that you want to select, and then
press SELECT button.
1
2
INPUT 1/2 button
INPUT 1
INPUT 2
Input 2
INPUT 3/4 button
INPUT 3
INPUT 4
INPUT 1-4 buttons
INPUT 1
INPUT 2
INPUT 3
INPUT 4
INPUT Menu icon
Move arrow to INPUT source
that you want to select, and
then press SELECT button.
WHEN SELECT INPUT 3 (DVI TERMINAL)
Input 3
When your computer is connected to INPUT 3 (DIGITAL) terminal,
select RGB(PC Digital).
RGB(AV HDCP)
When your computer is connected to INPUT 3 (ANALOG) terminal,
select RGB(Analog).
RGB(Analog)
RGB(PC Digital)
RGB(Scart)
When video equipment is connected to INPUT 3 (ANALOG) terminal,
select RGB(Scart).
If a HDCP-compatible signal source is connected to the INPUT 3
(DIGITAL) terminal, select RGB(AV HDCP).
NOTE;
HDCP (High-bandwidth Digital Content
Protection) is a system for protecting digital
entertainment content which is delivered by DVI
(Digital Visual Interface) from being copied.
The specification of HDCP is decided and
controlled by Digital Content Protection, LLC.
Should the specification be changed, this
projector may not display the digital content
protected by HDCP.
Move a pointer to either SDI 1 or SDI 2 and press SELECT button.
RGB
Y, Pb/Cb, Pr/Cr
Move a pointer to source that you want to select and press SELECT
button.
Move a pointer to source that you want to select and press SELECT
button.
When connect a computer output [5 BNC Type (Red, Green, Blue,
Horiz. Sync and Vert. Sync.)] from a computer to R/Pr, G/Y, B/Pb,
H/HV and V jacks.