Sanyo ECO G SGP-EGW190M2G2W, Технические данные инструкция

Страница: 8 / 80

Outdoor unit
2. Specifications
B-4
Model No. SGP-EGW190M2G2W
External dimensions (mm)
Height
2,248
Width 1,800
Depth 1,000(+60)
Weight (kg) 875
Performance (kW)
Cooling
capacity 56.0
Heating capacity (Standard) 63.0
Heating capacity (low temp.) 67.0
Hot Water (Cooling mode) 22.0 (@75°C exhaust)
Power generation capacity (rating) DC2.5 (Maximum of 4.3)
Generate electricity power source
220 to 240 V, 50 Hz,
Single-phase
Power supply specification
100/200 V, 50 Hz,
Single-phase, 3-wire
Electrical rating
Running amperes (A) 6.18
Power input (kW) 1.35 Cooling
Power factor (%) 95
Running amperes (A) 4.57
Power input (kW) 1.01 Heating
Power factor (%) 96
Starting amperes (A) 30
Gas Type
P Propane gas (G31)
H Natural gas (G20)
L Natural gas (G25)
Gas Band
E Natural gas (G20)
Gas consumption (kW)
Cooling
44.0 <38.3>
Heating (Standard) 48.7 <43.0>
Heating (low temp.) 62.1 <56.4>
Compressor
Cooling oil (L)
（
type
）
7.5 (HP-9)
Crankcase heater (W) 30
Paint color (Munsell code) Silky Shade (1Y8.5/0.5)
Notes
1. Cooling and heating capacities in the tables are determined under the test conditions of JIS B 8627.
Operating condition Cooling Heating (standard) Heating (low temp.) Heating (cold environ.)
Indoor air intake
temp.
27°C DB /19°C WB 20°C DB < 20°C DB/15°C WB < 20°C DB/15°C WB
Outdoor air intake
temp.
35°CDB 7°CDB/6°CWB 2°CDB/1°CWB -10°CDB/-11°CWB
・ Effective heating requires that the outdoor air intake temperature be at least –20°CDB or –21°CWB.
2. The Generate electricity is the generating-end output. The power output externally is calculated by subtracting the
self-consumed power. Power generation output is controlled in accordance with the air conditioning load, and the
maximum power that can be generated is 4.3 kW.
3. Gas consumption is the total (high) calorific value standard.
4. Outdoor unit operating sound is measured 1 meter from the front and 1.5 meters above the floor (in an anechoic
environment). In actual installations, values are normally larger than those indicated due to ambient noise and
reflections.
5. Quantities of gas and liquid refrigerant in parentheses ( ) apply when the maximum piping length exceeds 90 meters
(equivalent length). (Reducers are available locally.)
6. Specifications are subject to change without notice.
7. The gas consumption in < > apply when generator is not running.
8. Hot water heating capacity is applicable during cooling operation as in Note 1.
Engine
Displacement (L) 2.488
Rated output (kW) 12.4
Type Sanyo Genuine
Oil
Quantity (L) 46
Starter motor DC12V
×
2.2kW
Starter type
AC/DC conversion type DC
starter
Engine cooling water
Quantity (L) 27
Concentration, Freezing
temperature
50 V/V%, –35°C
Cooling water pump rated
output (kW)
0.16
Refrigerant type, Quantity
(kg)
HFC [R410A], 11.5
Air intakes Front and Rear
Air outlet Top
Piping
Refrigerant gas (mm)
φ 28.58.(brazed)
(
φ
31.75.) (Note 5)
Refrigerant liquid (mm)
φ 15.88.(brazed)
(
φ
19.05.) (Note 5)
Balance (mm)
φ
9.52.(flared)
Fuel gas R3/4 (Bolt, thread)
Exhaust drain (mm)
φ
25 . Rubber hose (length: 200)
Hot water supply in/out Rp3/4 (Nut, thread)
Operating sound dB(A) 58
Ventilation System
Type Propeller fans (
×
2)
Air flow rate (m
3
/min) 380
Rated output (kW) 0.70
×
2
Drain heater (W) 40
Generator
Capacity (kW) 4.3