-E6-
Inserting batteries
1
2
Note:
Remove the batteries if the remote control is not to be used for a
month or more. Batteries left in the unit may leak and cause
damage.
IMPORTANT NOTE:
SPENT OR DISCHARGED BATTERIES MUST BE
RECYCLED OR DISPOSED OF PROPERLY IN COMPLIANCE
WITH ALL APPLICABLE LAWS.
FOR DETAILED INFORMATION, CONTACT YOUR LOCAL
COUNTY SOLID WASTE AUTHORITY.
Remote sensor
Within approx. 20 feet
(6 meters)
Two "AA" batteries
(not supplied)
Remote control range
30
°
30
°
To set the remote control code for TV
This remote control can operate the basic functions of TVs made
by the manufacturers listed below.
To enter the remote control code for your brand of TV, follow the
steps below.
1. In the chart below, find the code corresponding to your brand
of TV .
2. While holding down [TV POWER], enter the 2-digit code
using the number buttons [0 - 9], then release [TV POWER].
•
The remote control is now set to operate your TV.
TV brands
Code
ADMIRAL
05, 10, 13
EMERSON
17
FISHER
03
GE
07
GOLD STAR
01
HITACHI
02
JVC
15
MAGNAVOX
08
MATSUSHITA
12, 18
MITSUBISHI
14
PANASONIC
12, 18
QUASAR
12, 18
RCA
06
SAMSUNG
16
SANYO
03
SHARP
00, 13
SONY
11
TECHNOL ACE
05
TOSHIBA
04
ZENITH
09, 10
Notes:
•
Only remote-controlled TVs can be operated using this remote
control. (Refer to your TV instruction manual for more details.)
•
There may be some TV models that cannot be operated with
this remote control. If this is the case, use the original remote
control supplied with the TV.
IMPORTANT NOTE:
If the batteries in the remote control are changed, the code
settings for the TV must be re-entered.
Write your code number below for future reference.
TV:
