Sanyo DSR-5709P, Инструкция по эксплуатации

Страница: 153 / 236

152
English
ADVANCED MENU SET 8
INTRODUCTION
SE
TTINGS
NE
T
W
O
R
K
CO
NT
RO
L
NETW
ORK
O
P
E
RATION
NE
T
W
ORK
S
E
TTINGS
OTHE
R
OPE
RATION
11
Turn the jog dial to select “2. ALARM
REC TRIGGER SET” and then turn the
shuttle dial clockwise.
The <ALAMR TRIGGER SET> screen is displayed.
On the <ALARM REC TRIGGER SET> screen, you can
specify an interlocking behavior the camera makes when an
alarm is detected. You can control the behavior of the camera
such as alarm-triggered lens orienting, and pan and tour
movement.
12
Turn the jog dial to select a camera
number, and then turn the shuttle dial
clockwise.
You will see “OFF” for “ACTION” flash.
For DSR-5709P, the camera numbers from “01” to “09” are
displayed.
z If a protocol is not set in the <PROTOCOL/ADDRESS
SET> screen, you will see “------” for “ACTION” and can not
set any value.
13
Turn the jog dial to select any value for
the interlocking behavior, and then turn
the shuttle dial clockwise.
The cursor moves to the next “ACTION” field.
[Settings] (
‹
indicates default setting)
z For “PRESET”, you can set “PRESET2-9” with DSR-5709P
and “PRESET2-16” with DSR-5716P.
z In the case more than one camera has issued an alarm
simultaneously, some or all trigger actions may fail to
operate correctly because only one camera can be
operated at a time.
z Actually available actions depend on each camera. For
more information, refer to the camera's instruction manual.
14
Use the same procedure as mentioned
above for other cameras’ interlocking
behavior.
15
Press the [EXIT/OSD] button.
The setting is completed and the display returns to the normal
screen.
<ALARM REC TRIGGER SET>
CH ACTION CH ACTION
01 OFF 09 ---------
02 OFF 10 ---------
03 OFF 11 ---------
04 OFF 12 ---------
05 --------- 13 ---------
06 --------- 14 ---------
07 --------- 15 ---------
08 --------- 16 ---------
<ALARM REC TRIGGER SET>
CH ACTION CH ACTION
01 OFF 09 ---------
02 OFF 10 ---------
03 OFF 11 ---------
04 OFF 12 ---------
05 --------- 13 ---------
06 --------- 14 ---------
07 --------- 15 ---------
08 --------- 16 ---------
Setting Description
‹ OFF No action triggered.
PRESET
Moves the camera lens to the angle
corresponding to your selected preset
number.
PAN Starts automatic panning.
TOUR Starts tour.
SEQUENCE Starts sequence.
<ALARM REC TRIGGER SET>
CH ACTION CH ACTION
01 OFF 09 ---------
02 OFF 10 ---------
03 OFF 11 ---------
04 OFF 12 ---------
05 --------- 13 ---------
06 --------- 14 ---------
07 --------- 15 ---------
08 --------- 16 ---------
EXIT/OSD