26
S4359249
Hou to replace the grille
(1)
Close the flaps.
(2)
Reinstall the grille into the lower part while aligning
its tabs on the upper part. (Fig. 3-54) Insert the
tabs in the slots and push the lower part of the
grille back into position.
(3)
Press at each of the 5 tabs to completely close
the grille. Make sure that the grille and frame are
firmly fitted together. (Fig. 3-55)
3-18. Preparing the Indoor Side Tubing
Tubing can be extended in 4 directions (4 directions for
KS2432A) as shown in Fig. 3-56.
Arrangement for Left Tubing (except KS2432A)
(a)
Cut out the left tubing outlet. (Fig. 3-57)
Arrangement for Right Tubing
(a)
Cut out the right tubing outlet using a hacksaw.
(Fig. 3-58)
Arrangement for Left-rear and Right-rear Tubing.
(a)
It is not necessary to cut a hole.
2244_T_I
2245_T_I
Left-rear
tubing
Left
tubing
Right-rear
tubing
(Recommended)
Right tubing
0949_T_I
0951_T_I
Right tubing
outlet
0950_T_I
Left tubing
outlet
Fig. 3-57
Fig. 3-58
Fig. 3-56
KS2432, KS2432A
Tubing can be extended in 4 directions as shown in
Fig. 3-52.
Arrangement for Right-rear Tubing
(a)
Remove the 2 screws and slide out the side
cover. (Fig. 3-59)
(b)
Extend the wide tube from the outdoor side and
connect it directly to the mating tube inside the
indoor unit. Use a flare nut. (Fig. 3-60)
KS3032, KS3632
1356_T_I
Fig. 3-59
Fig. 3-54
Fig. 3-55
