8
8
7
7
This button can be used for starting the
washer operation.
This button can also be used to temporarily
stop the washer operation.
To restart the washer operation, press the
START/PAUSE button again.
NOTES:
This is not a cancel button. If you want to
delete the End Buzzer, press the
START/PAUSE button and hold down for
about 4 seconds until beeping stops.
See page 13.
START/PAUSE Button
START/PAUSE Button
To turn the power on, press the POWER ON/OFF.
When you want to turn off the power, press the
POWER ON/OFF button again.
When washing has finished, the power will be turned
off in 5 seconds automatically.
( except Setting Remained water Draining function).
NOTES:
● If you want to change the wash program, press the
POWER ON/OFF button and then on it again.
● If you leave the washer turning on without starting
the operation, the power will be turned off in 10
minutes by itself.
POWER ON/OFF Button
POWER ON/OFF Button
You can choose the appropriate
water level that matches the load
size.
You can set CHILD LOCK function.
Refer to CHILD LOCK FUNCTION
at page12.
Different water levels for washing
rinsing optional.
Detailed operation please refer
to Page 11.
●
●
●
WATER LEVEL Button
CHILD LOCK Function
WATER LEVEL Button
CHILD LOCK Function
● This indicator shows remained
time during washing.
(E.g.) Remaining time is 20 minutes
REMAINING
TIME
●
This indicator shows when the
washing is finished during
presetting.
●
When setting PROCESS, the digital
display indicates time or times.
(E.g.) Twice Over flow Rinse
(E.g.) Finish washing 2 hours later
●
When abnormal conditions occur,
the indicator will indicate warning.
(E.g.) Water does not flow
This point lighting on during Overflow Rinse
TIMER And PRESET Indicators
TIMER And PRESET Indicators
●The PROCESS and SET button can be
used to set PRESET, SOAK, WASH time,
RINSE type and SPIN time.
For example to set Rinse type:
Press PROCESS button till RINSE light
flashes. Then press SET button to
choose you wanted rinse times and rinse
type.
Detailed operation please refer to
Page 10.
PROCESS And SET Button
PROCESS And SET Button
To choose the washing course,
press COURSE button.
NOTE
:
If you choose the NORMAL,
HEAVY DUTY, CUSTOM
course, the washer
will
automatically begin the
NEURO & FUZZY operation.
COURSE Button
COURSE Button
NAMES AND FUNCTIONS OF CONTROL PANEL
NAMES AND FUNCTIONS OF CONTROL PANEL
These are the spoon
indications of the
DETERGENT volume.
page9.
Detailed operation
please refer to
DETERGENT Indicators
DETERGENT Indicators
Press the button SOFT SPIN ,
the light above flashes. The last 2
minutes spinning will be soft spin,
this avoid clothes creasing.
SOFT SPIN
SOFT SPIN
9
9
12
12
11
11
10
10
13
13
RINSE
