background image

12

12

VARIOUS FUNCTIONS

VARIOUS FUNCTIONS

1.Press POWER ON/OFF button and make sure to fit the Drain Hose.
2.Press COURSE button continuously and choose the BLANKET course (The 
   BLANKET Light flashes).
3.After the detergent is dissolved with proper amount of warm water (approx. 30

), pour it 

   into the tub of the washing machine.
4.Fold up the blanket as the method showed in the figures below and put it into the 
   washing tub.
5.Press the START/PAUSE button.
6.Close the washer lid.

1    

1    

2    

2    

3    

3    

4

4

Put it into the wash tub with 
the edge downwards

Fold in two by the 
long side

Fold 4 times in the 
same direction

Roll up the blanket.

BLANKET

BLANKET

The washer will start washing when water to the level below 2 levels as set. By this, the 
washer starts working with more density of detergent.  

This function won't be effected when select level 1 or level 2 water, and DELICATE 

or BLANKET program. 

When SOAK is selected, this function will not be effected after soaking.

 

   

 

TWO CLEAN STEPS FUNCTION

TWO CLEAN STEPS FUNCTION

The Washer will stop working automatically and alarm if wash  lid opened 5 

 

during operation. 
Method of Child Lock Set: Press POWER ON/OFF button to switch on the power, press 
WATER LEVEL button for 4 seconds till Buzzer sounds. To restore it, repeat above or pull 
out the plug. 

er

seconds

CHILD LOCK FUNCTION

CHILD LOCK FUNCTION

Under CUSTOM, if set 2 times rinses, the first rinse will be shower rinse. If you don't want 
shower rinse, you can cancel it and it will change to Water Saver Rinse or Overflow Rinse.

Method of use:
Press POWER ON/OFF button to switch on the power, and press SET button for 4 
seconds till a sound from buzzer. To restore it, repeat above or pull out the plug.

REMEMBER FUNCTION

REMEMBER FUNCTION

SHOWER RINSE

SHOWER RINSE

11

11

HOW TO USE COURSE AND PROCESS

HOW TO USE COURSE AND PROCESS

5~12

7~14

6

12

10

OPERATION STATUS FOR THE COURSE

COURSE

NORMAL

HEAVY DUTY

DELICATE

BLANKET 

CUSTOM

Wash Time
 (minutes)

Rinse Type and Rinse Times 

Water Saver Rinse

 2 times 

Overflow Rinse 2 times

Overflow Rinse 2 times

Overflow Rinse 2 times

Shower Rinse 1 times

Water Saver Rinse

 1 times

Spin Time 
(minutes)

4-5

7-8

2

8

5


 Possible the total time is not same due to different water pressure. 
 Shower rinse could be changed as 

. Please see Page 12 instructions 

   SHOWER RINSE.

Water Saver Rinse

6     7     8                24      0     1          5(hours)

……

……

VARIOUS FUNCTIONS

VARIOUS FUNCTIONS

1. Press POWER ON/OFF button 

 

2. Turn the faucet on and load the laundry into the washer. 
3. Select your needed  OURSE, PROCESS and WATER LEVEL.
4. Press PROCESS button till light of PRESET flashes, press SET button select your 
    needed preset time ( the time washing finished). 
PRESET Indicate

5. Press START/PAUSE button. 
6. Put the detergent into the washer and close washer lid. 

All the lights except PRESET will be lighted off in about one minute later. 

Directly put the detergent into the tub. ( Do not make detergent touching

clothes) 

 PRESET confirming: Press SET button to indicate PROCESS about 5 seconds. 
 PRESET cancel, change: PRESET is canceled automatically when power

   off; Switch power on and set PRESET again to change it.

 This function is not available for DELICATE course.

and make sure to fit the Drain Hose.

C

● 
● 
   

PRESET

PRESET

This button allows you to choose the appropriate water level during WASH / RINSE 
process. 
Method: Press PROCESS till WASH light flashes, press WATER LEVEL button to choose 
the appropriate water level, press SET button to set wash time. Then press PROCESS 
button till RINSE light flashes, press WATER LEVEL button to choose the appropriate 
water level, press SET button to set RINSE times and RINSE type. Then press PROCESS 
button till SPIN light flashes, press SET button to set SPIN time. Finally press 
START/PAUSE, the washer will start operating according to the wash water level and 
rinse water level as set. 

WATER LEVEL SETTING

WATER LEVEL SETTING

12

12

When select NORMAL, CUSTOM or HEAVY  DUTY, 30 seconds after starting, the 
washer will remember this program and starts same next time working. 
 

PRESET  SOAK and WATER LEVEL will not be remembered. 

  The Wash, Rinse and Spin for CUSTOM program could be remembered.
 

●This function is not available for DELICATE and BLANKET course.

 ●

,


●The memory will be lost if pull out the plug.

Содержание ASW-A85HT









Отзывы: