Sanyo 3LUNA-1-T0636, Руководство по отчетам

Страница: 5 / 12

UN Test Data (Model:3LUNA-1-T0636)
1.Test Item: Altitude simulation (T1) P.3/10
2.Test Purpose: This test simulates air transport under low-pressure conditions.
3.Test Procedure:
Test cells and batteries shall be stored at a pressure of 11.6kPa or less for at least six hours at ambient
temperature(20±5
℃
).
SANYO Internal Procedure:
As above.
4.Test Requirements:
No mass loss(less than 0.1%),no leakage,no venting,no disassembly,no rupture and no fire,and the voltage
retention is not less than 90%.
The requirement relating to voltage is not applicable to test batteries at fully discharged states.
5.Test Date: 2010/1/26
6.Test Data
Before test After test Before test After test
1 161.99 162.00 0.006 12.84 12.82 99.8 0 PASS
2 161.99 161.93 0.037 12.83 12.81 99.8 0 PASS
3 161.84 161.81 0.019 12.82 12.81 99.9 0 PASS
4 162.31 162.32 0.006 12.85 12.83 99.8 0 PASS
5 162.01 161.97 0.025 0 PASS
6 162.01 161.98 0.019 PASS
7 161.99 161.96 0.019 0 PASS
8 161.93 161.92 0.006 0 PASS
9 162.03 162.04 0.006 12.83 12.82 99.9 0 PASS
10 161.81 161.84 0.019 12.85 12.84 99.9 0 PASS
11 161.99 162.04 0.031 12.83 12.82 99.9 0 PASS
12 161.87 161.90 0.019 12.82 12.81 99.9 0 PASS
13 162.00 162.04 0.025 0 PASS
14 162.08 162.10 0.012 0 PASS
15 161.73 161.77 0.025 0 PASS
16 161.97 161.99 0.012 0 PASS
Notes: L-Leakage, V-Venting, D-Disassembly, R-Rupture, F-Fire,
0-No leakage, no venting, no disassembly, no rupture & no fire
Other
event
Result Judgement
At first
cycle,in
fully
charged
states
PASS
At first
cycle,in
fully
discharged
states
After 50
cycles
ending in
fully
charged
states
After 50
cycles
ending in
fully
discharged
states
Battery No.
Mass(g)
Mass loss
(%)
(=<0.1%)
Voltage(V)
Voltage
Retention(
%)(=>90%)