background image

4

NAMES OF PARTS

This illustration is based on the external view of a standard model.
Consequently, the shape may differ from that of the air conditioner 
which you have selected.

This air conditioner consists of an indoor unit and an outdoor unit. 
You can control the air conditioner with the remote control unit.

UNIT DISPLAY AND OPERATION 
BUTTON

Avoid using radio equipment such as mobile phone near (within 
4 ft. (1.2 m)) the remote control receiver. Some radio equipment 
may cause malfunction of the unit.

If the trouble happens, disconnect power and restart the air 
conditioner after a few minutes.

The unit’s display lamps are dimmed during operation in the NIGHT 
SETBACK mode.

Air Intake

Air from the room is drawn into this section and 
passes through air filters which remove dust.

Air Outlet

Conditioned air is blown out of the air 
conditioner through the air outlet.

Remote 
Control Unit

The wireless remote control unit controls power 
ON/OFF, operation mode selection, 
temperature, fan speed, timer setting, and air 
sweeping.

Refrigerant 
Tubes

The indoor and outdoor units are connected by 
copper tubes through which refrigerant gas 
flows.

Drain Hose

Moisture in the room condenses and drains off 
through this hose.

Outdoor 
(Condensing) 
Unit

The outdoor unit contains the compressor, fan 
motor, heat exchanger coil, and other electrical 
components.

INDOOR UNIT

Air intakes

Remote control unit

Refrigerant tubes

Drain hose

OUTDOOR UNIT

Air outlet

Air outlet

 

(4 locations)

NOTE

REMOTE 
CONTROL 
receiver

This section picks up infrared signals from the 
remote control unit (transmitter).

OPERATION 
button 

When the remote control cannot be used, 
pressing this button enables heating and 
cooling operation.

Each time this button is pressed, the type of 
operation conducted is indicated by the 
changing color of the OPERATION lamp. Press 
the button and select the lamp color that suits 
your preference for operation. 

OPERATION 
lamp

This lamp lights when the system is in the 
continuous AUTO (red or green), HEAT (red), 
DRY (orange), COOL (green) and FAN (green) 
mode.
The OPERATION lamp lights up red and orange 
alternately when the system is defrosting. 

TIMER lamp

This lamp lights when the system is being 
controlled by the timer.

HIGH POWER 
lamp

This lamp lights during operation in the HIGH 
POWER mode.

REMOTE CONTROL receiver

OPERATION lamp 

TIMER lamp

OPERATION button

HIGH POWER lamp

INDOOR UNIT

IMPORTANT

Cooling 

operation 

(green)

Heating 

operation 

(red)

Stop 

(lamp off)

NOTE

OI-107-4-EG

01_XHS1872_EN.fm  Page 4  Thursday, September 25, 2008  11:09 AM

Содержание 12XHS71

















Отзывы: