background image

3

PRODUCT INFORMATION

If you have problems or questions concerning your Air 
Conditioner, you will need the following information. Model 
and serial numbers are on the nameplate on the bottom of 
the cabinet.

Model No.  __________________________________

Serial No. ___________________________________

Date of purchase _____________________________

Dealer’s address _____________________________

Phone number ________________

ALERT SYMBOLS

The following symbols used in this manual, alert you 
to potentially dangerous conditions to users, service 
personnel or the appliance:

INSTALLATION LOCATION

• We recommend that this air conditioner be installed 

properly by qualified installation technicians in 
accordance with the Installation Instructions 
provided with the unit.

• Before installation, check that the voltage of the electric 

supply in your home or office is the same as the voltage 
shown on the nameplate.

Avoid: 

To protect the air conditioner from heavy corrosion, avoid installing 
the outdoor unit where salty sea water can splash directly onto it or 
in sulphurous air near a spa.

ELECTRICAL 
REQUIREMENTS

1.

All wiring must conform to the local electrical codes. 
Consult your dealer or a qualified electrician for details.

2.

Each unit must be properly grounded with a ground (or 
earth) wire or through the supply wiring.

3.

Wiring must be done by a qualified electrician.

SAFETY INSTRUCTIONS

• Read this Instruction Manual carefully before using 

this air conditioner. If you still have any difficulties 
or problems, consult your dealer for help.

• This air conditioner is designed to give you 

comfortable room conditions. Use this only for its 
intended purpose as described in this Instruction 
Manual.

This symbol refers to a hazard or unsafe 
practice which can result in severe 
personal injury or death.

This symbol refers to a hazard or unsafe 
practice which can result in personal 
injury or product or property damage.

• Do not install this air conditioner 

where there are fumes or flammable 
gases, or in an extremely humid space 
such as a greenhouse.

• Do not install the air conditioner where 

excessively high heat-generating 
objects are placed.

CAUTION

• Never use or store gasoline or other 

flammable vapor or liquid near the air 
conditioner — it is very dangerous.

• This air conditioner has no ventilator 

for intaking fresh air from outdoors. 
You must open doors or windows 
frequently when you use gas or oil 
heating appliances in the same room, 
which consume a lot of oxygen from 
the air. Otherwise there is a risk of 
suffocation in an extreme case.

• Do not turn the air conditioner on and 

off from the power mains switch. Use 
the ON/OFF operation button.

• Do not stick anything into the air outlet 

of the outdoor unit. This is dangerous 
because the fan is rotating at high 
speed.

• Do not let children play with the air 

conditioner.

• Do not cool or heat the room too much 

if babies or invalids are present.

CAUTION

OI-107-3-EG

01_XHS1872_EN.fm  Page 3  Thursday, September 25, 2008  11:09 AM

Содержание 12XHS71

















Отзывы: