SANY SY500H страница 16 Скачать руководство пользователя | Manualshive

Страница: 16 / 196

background image

1-2

INTRODUCTION

SY500H Excavator OMM

About This Manual

This manual provides operation and maintenance
information for the SY500H excavator.

WARNING

Unsafe operation and maintenance of this
machine could result in death or serious injury.
This machine must be operated and maintained
by trained and experienced personnel. Do not
operate or work on this machine without first
reading and understanding the Operation and
Maintenance Manual supplied with this machine.

It is important to read and understand this manual before
beginning any operation or service. All personnel
involved with this machine should read this manual
periodically to remain knowledgeable on its operation
and service.
Items addressed in this manual are designed to help the
operator or service personnel:

• Understand the controls and the operation of the

machine.

• Point out possible hazardous situations when

operating or maintaining the machine.

• Increase machine efficiency during operation.

• Prolong the service life of the machine.

• Reduce maintenance costs.

Continuing improvements in the design of this machine
can lead to changes which may not be covered in this
manual. Contact a SANY dealer for the latest available
information on the machine or to answer any questions
regarding information in this manual.

Documentation Package

This documentation applies only to this machine and
should not be used with any other machine. The
documentation for this machine includes the Operation
and Maintenance Manual, Parts Manual, and
Maintenance Log.

Operation and Maintenance Manual

A copy of this manual must be stored in the machine or
be accessible to the operator at all times. If the machine
is sold, a copy of this manual must be provided to the
new owner.
A copy of the Operation and Maintenance Manual should
be made available to maintenance personnel when
servicing the machine.

Parts Manual

The Parts Manual consists of parts lists and matching
drawings used for ordering parts as needed. The Parts
Manual must be made available to all service personnel.

Maintenance Log

The Maintenance Log lists regularly scheduled
maintenance that should be performed by the operator or
service personnel. All maintenance performed on the
machine must be recorded in the Maintenance Log.

«
...
14
15
16
17
18
...
»

Содержание SY500H





































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SY500H

Бренд: jcb Страницы: 208

Бренд: ZIEHL-ABEGG Страницы: 64

Бренд: JACK RABBIT Страницы: 18

Бренд: jcb Страницы: 51

Бренд: Kubota Страницы: 115

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды