SY215C LC/SY225C LC Excavator OMM
Machine Operation
SANY
Operation and Maintenance Manual — 1219
4-47
TABL
E OF
CONT
E
N
TS
INTRODUCTION
SAFE
T
Y
MACHIN
E
CONTROLS
MACHINE
OP
ERA
T
IO
N
MA
INTENANCE
S
P
E
CI
F
ICA
T
ION
S
OP
T
IO
N
A
L
EQUI
PMENT
Short-Term Storage
NOTE:
Short-term storage is defined as a storage period of 30 days or less.
Complete the “Overnight Storage” on page 4-45 procedure, and then:
•
Clean the machine.
•
Keep it dry.
•
Keep it fully lubricated.
•
Cover it to protect it from dust.
•
Turn the battery disconnect switch to OFF.
Long-Term Storage
NOTE:
Long-term storage is defined as a storage period of more than 30 days.
Proper preparation for long-term storage will reduce the chances of machine damage and deterioration.
1. Park the machine in a secure location and position the work equipment with the arm and bucket fully extended.
Support the dozer blade on a block.
2. Move the throttle control dial to MIN (low idle). Run the engine at idle for 5 minutes to cool it down.
3. Shut down the engine.
4. With the engine not running and the hydraulic lockout
control lever in the unlocked (open) position (1), turn
the key switch to the ON position and operate all
joysticks and levers to relieve the hydraulic system
pressure.
5. Turn the key switch to the OFF position and remove the
key.
NOTE:
Always remove the key and take it with you,
even when you are leaving the machine for
only a moment. This prevents unauthorized
operation of the machine.
6. Place the hydraulic lockout control lever in the locked
(closed) position.
NOTICE!
Extend the bucket and arm and lower the boom to prevent the cylinder rods from rusting.
Fig. 4-56
1
0004580
Содержание SY215C LC
Страница 2: ...This Page Intentionally Left Blank ...
Страница 271: ...This Page Intentionally Left Blank ...