Sanwa MT-44 Скачать руководство пользователя страница 56

Страница: 56 / 68

５５

５６

Usage of each fea

ture

Usage of each fea

ture

System Menu

SYSTEM

RACING MODE [R-MODE]

ENTER

BACK

ENTER

BACK

●A feature to adjust the running characteristics of your RC car by switching the Racing Mode so

that the features compatible to the Racing Mode can respond to your RC car and road conditions.

●It allows you to set two setting values of R1 and R2 individually for features that are compatible

to the Racing Mode for each Model Memory, and to change by the switches that are assigned

during operation.

●As a default, ON/OFF of R-MODE is not assigned to the switch.

1)Select [SYSTEM] with the multi-selector and determine

with the Enter operation.

2)Select [R-MODE] with the multi-selector and determine

with the Enter operation.

3)Set the features that corresponds to the action of the

Racing Mode with the multi-selector.

Channel selection is done by the Select button.

○Setting range:

R-MODE: OFF/2

Compatible equipment: Each Feature ON/OFF

○Default :

R-MODE: INH

Compatible equipment: Each Feature OFF

○Compatible Equipment

• ST/TH: D/R, SPEED, CURVE, TRIM

• AUX: D/R, SPEED, CURVE, TRIM, AUX

4) By setting the feature of R-MODE onto the switch

and operating during running, you can switch to

the Racing Mode.

The Assignments feature allows you to add changes

to the Trim lever and the switch (P. 51, 52).

*Set according to a setting change of SUPER VORTEX,

tire wear, change of the road condition.

CHANNEL
SELECTION

RACING MODE
DISPLAY

ENTER

BACK

ENTER

BACK

BUZZER

●You can set operating sounds of key operation, Trim and Switch and the buzzer scales.

●For key operation only, you can set the first and last half of the operation sound.

●You can set 5 steps of the volume and 7 types of scales.

1)Select [SYSTEM] with the multi-selector and determine

with the Enter operation.

2)Select [BUZZER] with the multi-selector and determine

with the Enter operation.

3)Setting Tone and Volume

You can switch between Tone (scales) and Volume

(Sound Volume) with Select button operation.

Select an item to change setting to adjust.

○ Setting Items: KEY-CLICK

TLM1-ALERT

TLM2-ALERT

VOLT-ALERT

TIMER

INTERVAL

LAP-NAVI

*You can set the first and last half of the operation sound for

KEY CLICK tone (scales).

○Setting range: TONE 1~ 7

VOLUME OFF ~ 5

○Default : VOLUME 4

TONE 1 (KEY CLICK 1 ->1]

BATTERY

●You can change the voltage setting of the battery alarm of the transmitter.

●By selecting Type [DRYx3 (Batteries)/Ni-MHx3 (Nickel Hydride)/Li-Pox1 (Lithium Polymer),

CUSTOM], you can set the alarm easily.

*When selecting CUSTOM with the Type,

you can set ALERT VOLT that sets voltage to make

Alarm go off and LIMIT VOLT of the lower voltage.

●TH SLOW (Throttle Slow) is a feature to limit (50%) the

operating quantity of the throttle’s high side when

the battery voltage of the transmitter becomes LIMIT VOLT

(Fail-Safe feature).

1)Select [SYSTEM] with the multi-selector and determine with

the Enter operation.

2)Select [BATTERY] with the multi-selector and determine with

the Enter operation.

3)Setting TYPE

Set TYPE for the battery to be used with the multi-selector.

○Setting range: DRYx3 (Batteries)

Ni-MHx3 (Nickel Hydride)

Li-Pox1 (Lithium Polymer)

CUSTOM: ALERT VOLT 3.0 ~ 5.0v

LIMIT VOLT: 2.7 ~ 5.0v

○Default: DRYx3 (Batteries)

ENTER

BACK

Usage of each feature

Содержание MT-44





































































Результаты поиска

Содержание MT-44

Отзывы:

Бренды по названию

Популярные бренды

Sanwa MT-44, Руководство пользователя

Результаты поиска

Содержание MT-44

Отзывы:

Бренды по названию

Популярные бренды