３１
３２
Usa
ge of e
ach
featur
e
Usage of e
ach
fea
tur
e
THROTTLE FUNCTION /TH-FUNCTION
Anti-Lock Brake[ALB]
THROTTLE FUNCTION/TH-FUNCTION
OFFSET
THROTTLE FUNCTION/TH-FUNCTION
THROTTLE TYPE[TH TYPE]
THROTTLE FUNCTION/TH-FUNCTION
●The throttle function allows you to adjust the setting values of ALB (Anti-Lock Brake), OFFSET and TH TYPE
(throttle type) of the throttle channel.
● Anti-Lock Brake enables stable braking on a low grip road.
● Because of the stable braking, you can trace cornering lines as intended.
1) Select the throttle function with the multi-selector and determine
with the Enter operation.
2) When selecting [ALB] with the multi-selector and determining with
the Enter, the menu changes to ALB setup menu.
3) Setting Stroke (STROKE)
Set Stroke of ALB with the multi-selector.
Stroke is the width of repeated actions at the time of bra king.
○Setting range
OFF
,
0
～
100%
○Default
OFF
*OFF ALB does not work when it is off.
4) Setting Point (POINT)
Set Point of ALB with the multi-selector.
Point is the position where ALB starts acting when operating the
brake.
○Setting range:
5%
～
100%
○Default:
80%
5
) Setting Lag (LAG)
Set Lag of ALB with the multi-selector.
Lag is a setting of time lag from the time when operating to the
point to the time when ALB starts acting.
○Setting range:
0.00s
～
1.00s
○Default:
0.00s
6)Setting Cycle (CYCLE)
Set a cycle of ALB with the multi-selector.
Cycle is a frequency setting of repeated actions for braking.
○Setting range:
0.01s
～
1.00s
○Default:
0.08s
* When Anti-Lock Brake is working, X illumination and
Function LED flash.
Supplement
● Activate the brake rather strongly not to the extent that the t ires of your RC car lose their grips
(not to slip) and adjust so that Anti-Lock Brake is activated just before the tires are locked and slide.
● If you set ALB using a speed controller with a back on an RC car, you may not able to operate back
movement. When using a back movement, turn ALB off.
Neutral
*ALB is activated when operating from the
point position to full brake.
Position of the Point
Full Brake
Brake operation
Set each Parameter.
Lag
Cycle
ENTER
BACK
ENTER
BACK
●You can move the neutrals position of the throttle and set the operating ratio of the forward side and the brake
(backward) side to either 7:3 or 5:5.
*Set the throttle type according to the speed controller to be used.
1) Select the throttle function with the multi-selector and determine
with the Enter operation.
2) Select [TH TYPE] with the multi-selector and determine with Enter.
3) Setting the Throttle Type
Set the Throttle Type with the multi-selector.
○Setting range: F7:B3 / F5:B5
○Default: F7:B3
*When changing TH TYPE, the screen changes to the confirmation
screen and a message is displayed. Operate following the message.
● By moving the position of the throttle neutral at the time of starting an engine RC car engine,
it improves the start-up performance of the engine.
● You can fix at a position where idling speed is increased so that the engine will not stop during refueling your engine RC car.
● By operating the switch that has been set, you can stop the engine of your RC boat.
● You can use various power sources with Offset feature.
● ON/OFF of the Offset feature is not assigned to the switch and keys at the factory.
When using, assign the features with key assignment (P. 51, 52)
1) Select the throttle function with the multi-selector and
determine with the Enter operation.
2) Select [OFFSET] with the multi-selector and determine with Enter.
It will change to OFFSET Setting menu.
3) Setting Offset [OFFSET]
Set ON/OFF of the Offset feature with the multi-selector.
○Setting range:
ON/OFF
○Default:
OFF
4) Setting Type [TYPE]
Set Type of the Offset with the multi-selector.
○Setting range: I-UP (Idle Up)/N-BR (Neutral Brake)
○Default:
I-UP
5) Setting Point [POINT]
Set Point of the Offset with the multi-selector.
○Setting range:
H100%
～
B100%
○Default:
0
％
6) Setting Beep [BEEP]
Set Alarm (Beep) that goes off when the Offset is activated.
○Setting range:
ON/OFF
○Default:
OFF
* When the Offset feature is working, X illumination and Function
LED flash.
Trigger Control Input
Neutral position
for Normal
OFFSET Position
When setting plus
Servo operating quantity
OFFSET Position
when setting minus
OFFSET Position Neutral position
when setting minus
OFFSET Position
Neutral position
when setting plus
ENTER
BACK
ENTER
BACK
Servo action
Neutral
Point
Stroke
Usage of each feature
Содержание MT-44
Страница 1: ... 90478 ...
Страница 68: ......
