Sanwa DCL1000, Инструкция по эксплуатации, Страница: 21 / 23

— 18 —
8-2 Measuring Range and Accuracy
Temperature: 23±5˚C, humidity: 75% RH max., built-in battery
voltage 2.4 V or above.
rdg (reading): Read value, dgt (digit): Number of counts of last
digit
ACA
400.0A
1000A
Range Accurac Remarks
±
( 1.7%rdg+5dgt ）
±(1.7%rdg+5dgt ）
･
This meter is of average value response.
Frequency range: 50/60 Hz (Sinusoidal wave AC)
･
Accuracy is specified when an object is measured
at the center of the clamp sensor (CT),
･ A guide for a range of conductor positions
for accuracy guarantee
In other places of conductors to be
measured, the accuracy is as follows:
A area: 4% is added to the specified
accuracy.
B area: 1% is added to the specified
accuracy.
･ For accuracy when the indicated value is 15% of
the range or less, 8 dgt is added to the accuracy.
･
An induction error below 0.06 A/A may occur due to
influence of current flowing in adjacent conductors.
･ It may malfunction when measuring voltage/current in
the inverter circuit.
Center
A
B
400.0mV
4.000V
40.00V
400.0V
600V
Range Accuracy Input Impedance Remarks
±(1.2%rdg+3dgt ）
±(1.9%rdg+3dgt ）
±(2.2%rdg+4dgt ）
Approx. 1000M Ω
Approx. 10M
Ω
DCV
DCL1000_英本文_三 06.4.14 6:55 PM ページ 18