manualshive.com logo in svg

Sanwa DCL1000, Инструкция по эксплуатации, Страница: 16 / 23

Поделиться
Скачать
Sanwa DCL1000 Скачать руководство пользователя страница 16

— 13 —

[6]  MAINTENANCE

1. The following instructions are very important for safety.  Read

this manual thoroughly to ensure correct maintenance.

2. Calibrate and inspect the meter at least once a year to ensure

safety and maintain its accuracy.

WARNING

6-1 Maintenance and Inspection

1) Appearance: Is the meter not damaged due to falling or other cause?
2)Test leads: Are the test leads not damaged, or is the core wire

not exposed from any part or broken?
If any of the above problems exists, stop using the
meter and request for repair.

6-2 Calibration and Inspection

For more information, please contact your dealer or Sanwa agent.

6-3 Storage

6-4 Battery Replacement

Battery when the meter is shipped:
A battery for monitoring has been installed prior to shipment from the
factory. It may be discharged before the expiration of the described
battery life.

*The battery for monitoring is a battery used to check the

functions and performance of the product.

1. The panel and case are not resistant to volatile solvent and must not

be cleaned with thinner or alcohol.

2. The panel and case are not resistant to heat.  Do not place the meter

near heat-generating devices.

3. Do not store the meter in a place where it may be subjected to

vibration or from where it may fall.

4. Do not store the meter in places under direct sunlight, or hot, cold or

humid places or places where condensation is anticipated.

5. If the meter will not be used for a long time, remove the battery.

CAUTION

DCL1000_英本文_三  06.4.14 6:55 PM  ページ 13

Содержание DCL1000
























Отзывы:

Нет отзывов