Sanus VF2012, Инструкция по эксплуатации

Страница: 9 / 40

6901-170180 <05>
9
1 Mount the Wall Plate
VF2022
3mm
(1/8 in.)
12 mm
(7/16 in.)
< 16 mm
(5/8 in.)
CAUTION:
Avoid potential injuries or property
damage! Pilot holes MUST be drilled to a depth of 51mm
(2 in.) using a 3mm (1/8 in.) diameter drill bit.
CAUTION:
Do not over-tighten the lag bolts [12] .
Tighten the lag bolts [12] only until the washers [11] are
pulled against the wall plates [02] .
[02]
[02]
[02]
[02]
[12] [12] [12]
[11]
[11]
[11]
[02]
[11]
[12]
51 mm
(2 in.)
NOTE: Use awl to verify stud location.
CAUTION:
Avoid potential personal injuries and
property damage!

Any material covering the wall must not exceed 16
mm (5/8 in.)

Minimum wood stud size: common 51 x 102 mm (2 x
4 in.) nominal 38 x 89 mm (1.5 x 3.5 in.)
Level the wall plates
[02] and mark the hole
locations.
35-43 cm
(14-17 in.)