Sanus VF2012, Инструкция по эксплуатации

Страница: 10 / 40

6901-170180 <05>
10
2 Mount the Column(s)
Mount column [01] onto wall plate [02] by aligning the
slots of the column locking bar with the hooks on the
wall plate
[02] .
When the column [01] is pressed onto the wall plate
[02] , the locking bar will lift slightly (see A) then drop
over the hooks of the wall plate (see B) .
CAUTION:
Avoid potential injuries or property
damage! Be sure the hooks on the wall plate [02]
engage with the pillar [01] . The pillar must sit flush
with the wall.
To lock the column
[01] in place, press
the locking bar
down and replace
top locking screw
(S) and tighten.
A B
[10]
[14]
[05]
[04]
[03]
[01]
[02]
[01]
(S)
[05]
[03]
1.5 mm
(1/16 in.)
Add shelf rests [04] to shelf brackets [03] by fi tting them into notch
on edge of shelf brackets [03] and pressing down to secure.
Add nut plate [05] to shelf bracket with screws [10] using the 5/32 in.
hex key [14] .
Leave a gap of 1.5mm (1/16 in.) between
the nut plate
[05] and the back of the
bracket [03] .
3 Assemble Shelf Brackets